Home         About Us         Products     Contact Us      Feedback
Coating Solution for OEM's like Bus Bodies, Auto Components, CNC & SPM, Crane, Fork Lift & Material Handling Equipments ,Car Refinishes ,Two / Three Wheelers Refinishes ,Electrical Engineering Machinery, Plastic, FRP Industry ,Chemical Industry ,Gas Cylinder ,Cycle Industry ,Furniture Manufacturing
       Products

 We are leading Manufacturers & Suppliers of Industrial &   automobiles paints & Pigments .

 Coating Solution for OEM's like :
• Bus Bodies
• Auto Components
• CNC & SPM
• Crane, Fork Lift & Material Handling Equipments
• Car Refinishes
• Two / Three Wheelers Refinishes
• Electrical & Engineering Machinery
• Plastic & FRP Industry
• Chemical Industry
• Gas Cylinder
• Cycle Industry
• Furniture Manufacturing

Featured Product

Coats
Machine
 
• Product Range
 
• Two Pack Polyurethane Finishes (Auto & Industrial Grade )

• Two Pack Epoxy finishes ( Polyamine / Polyamide )

• Syn. Q.D. Enamels (Auto Finishes )

• Synthetic Enamels ( Auto & industrial Grade )

• Acrylic Auto Finish

• Stoving Enamels (Auto finishes & Industrial Grade)

• Synthetic Stoving Enamels ( A/D cum Stoving )

• Two Pack Epoxy Primer : Zn. Phosphate / Zn. Chromate / R.O.Z.C.

• Synthetic Stoving Primer : H.L.P.S. / M.L.P.S. ( Chocolate / Pink & Grey )

• N.C. Paints & Primers

• Synthetic Primer : Zn. Chromate / Zn. Phosphate / R.O.Z.C.

• Etch Primer (Zn. Chromate Yellow )

• Thinners : G.P. / N.C./ Stoving / Epoxy / P.U. Thinner / Acrylic

• Chlorinated Rubber paint

• Coal - tar Epoxy Paint

• Melamine Wood Sealer & top Coat. ( Clear )

• Zinc Rich Primer / MIO Primer

• Thermo Plastic Acrylic Paints
 
SYNTHETIC Q.D. ENAMELS
 
Physical Properties (Liquid Paint) : -
Composition
Fatty acid based chain stop Alkyd
Specific Gravity
1.10 (± 0 .05)
Non volatile matter
50% (± 5)
Fineness of grinding
+7 (Hegman Guage)
Supply viscosity
70 (± 5 sec) at R.T.
Thinner Intake
25% Maximum by volume
Application Viscosity
22-25 Sec by Cup at R.T.
Drying time
Surface Dry : 5 min, Tack free : 3 hrs.Hard Dry. : Over Night
DRY FILM PROPERTIES
Finish
Smooth & Gloosy
Shade
As per Standard
D.F.T.
20-25 micron. Per coat
Hardness
Pencil Hardness : HB, Scratch Hardness : 1000gm
Glossy
80 ( ± 5 ) unit at an angle 60 °
Flexibility
1/8” ( After 72 hrs.)
Adhesion
100% passes (cross-cut) (after 72 hrs.)
Impact
500 gms from 50 cms passes
Salt Spray
96 hrs. (for total system)
Coverity
100sq.fts. (±5) sq.ft. per lit.
Moisture Resistance
100 hrs. at 98% Relative Humidity at 49 °c (±1) °c
Weathering Test
100 hrs. (10% gloss reduction accepted)