Diamond Needle Files, Diamond Files, Diamond Saws, Diamond Micron Powder, Diamond Lapping Compound

Diamond mounted points are used for jig, internal grinding and precision grinding of small holes in carbides , glass, ceramics, sapphire and many of the tough , super alloys presently being machined. CBN mounted points are used similarly on tough , high carbon , high chrome steels. These are readily available in sizes varying from 1.0 mm to 20 mm.
Grit Size : 80 / 100 (Rough), 120 / 140 (Medium), 200 / 240 (Fine), or as specified.

Recommended Use : Low wheel speed is one of the major causes of poor performance in super abrasive products like Diamond or CBN. Wheel loading and heat build-up are common signs of low RPM. The recommended speed for Electroplated Diamond Internal Grinding Wheel is 2100 to 3600 m/min and for Electroplated CBN Wheel is 3600 to 6000 m/min. The suggested feed vary from 0.005mm to 0.05mm depending on the material ground. Coolant should be used wherever possible, but can be used dry successfully.

Varun Udyog Diamond Saws Are highly efficient in cutting hard materials such as carbides, Ferro magnets, glass fibre, bakelite, glass, Hard Plastics, Brake Lining etc whatever be the various properties such as hardness density and grain texture.
Metal Bond Diamond Saws are made upto 350 mm diameter, suitable for sawing and slitting and are used for cutting Tungsten Carbide, Glass, Ceramics, Silicon Carbide, Quartz, Abrasives

Standard sizes of 4,6,8,10,12,18,20 inches are readily available in thickness from 0.8 mm to 3.0 mm or as specified.

Grit Size : 80 / 100 (Rough), 120 / 140 (Medium), 200 / 240(Fine), or as specified.

Diamond abrasive grits are categorized accordingly to their application which in turn depend on particle size. The largest sizes are used for tool stones which fall in the stone category, next under the heading of GRIT, firstly the saw sizes and then the grinding or the wheel sizes . Finally we come to fine powders of which the largest sizes are used for lapping and the smaller for polishing purposes.Varun Udyog diamond Powder consists of strong , blocky and well shaped diamond particles with many re- entrance surface and sharp well defined cutting edges manufactured from high quality diamonds. Diamond micron powders are available in all sizes from D-1/4 to D-140 , These are used for removal of stock ( D-140) , roughness ( D-30) and to give mirror polish ( D-3 ..D-1), In dies and tools.