• Steel Casting
Steel castings are especially adapted for parts that must withstand wear, shocks or heavy loads.They are stronger than either wrought iron or cast iron or malleable iron and are very tough. High alloy Steel castings can be heat treated to bring about the diffusion of carbon or alloying elements, softening, hardening, stress relieving, toughening, improve machinability, increase wear resistance, and removal of hydrogen entrapped at the surface of the casting. more...
|
|
--------------------------------------------------------------------------------------------------------------------------------- |
• Cast Iron Castings
Alloy Cast Iron Casting
These are cast iron based alloyed with Nickel, Chromium and Molybdenum having a matrix of pearlite and carbide with flake graphite. These rolls are used primarily for section Rolling. The material has very good thermal properties coupled with property of imparting good surface finish to the product. These rolls show rich and deep layer of chill with minimal fall in hardness. more... |
|
--------------------------------------------------------------------------------------------------------------------------------- |
• Manhole Covers
Manhole covers are used for water tank, Drainage line under the road Various sizes are produced & available with us
more... |
|
--------------------------------------------------------------------------------------------------------------------------------- |
• Hardware Casting
Door Handle
The handle is notmally used for swinging, sliding and many other types of doors. The handles are easily fixes in wooden and iron doors. The handles are available with and without conventional key slots.
more...
|
|
--------------------------------------------------------------------------------------------------------------------------------- |
• Spheroidal Graphite Iron Casting
|
|
• Capacity: |
:200 mT/month (3shifts basis) |
• Types of Metals Produced |
:Steels, Alloy Steel, SG Iron, Alloy Cast Iron, Stainless Steel |
• Various Grades to be produced |
: GGG40, C45, 42CrMo4,G26CrMo4 |
• In-house Testing Facilities |
:Spectrometer, Microscope and Tensile Testing Facilities |
• Sand Reclamation System |
:generates no waste sand |
• Continuous S & Mixer |
:Producing good quality Molds |
more... |
|
--------------------------------------------------------------------------------------------------------------------------------- |
• Copper Alloy Casting
Casting pure copper is extremely difficult since it may result in surface cracking, porosity problems and the formation of internal cavities. The casting characteristics of copper can be improved adding small amount of other metals including beryllium, silicon, nickel, tin, zinc, chromium and silver. more...
|
--------------------------------------------------------------------------------------------------------------------------------- |
• Aluminum Alloy Casting
Aluminum casting alloys must contain, in addition to strengthening elements, sufficient amounts of eutectic-forming elements (usually silicon) in order to have adequate fluidity to feed the shrinkage that occurs in all but the simplest castings. Required amounts of eutectic formers depend in part on casting process.
more...
|