|
CENTRAL MONITORING SYSTEM
Digitally Video Monitoring System
The best way to protect your business from the
threat of Employee theft and provide critical
information in the event of robbery or
litigation is to have the incident recorded with
a Digitally Video Monitoring System. The
continuous events of your premises covered with
the help of cameras, will be recorded on your
PC’s hard disk.
Years ago camera systems delivered poor quality
recordings, required tapes to be changed daily
and were affordable only to large corporations.
Now, using the latest microprocessor based
technology, stand alone independent system, the
recording done in MJPEG format can be used for
multi-channel live viewing, recording and video
clips can be sent over standard phone lines, LAN
lines, ISDN or Internet.
PC based DVR systems are the immediate future
for trouble free CCTV solutions.
DIGITAL COMMUNICATOR FIRE & SECURITY ALARM
SYSTEM
We now offer Indigenous Fire & Security Alarm
System, totally developed by us including
software.
Earlier we were hesitant to use the imported
systems on account of the maintenance and
availability of spares. However, now we have
nothing to worry about since we have our very
own Made In India System.
With this System, the Control Panel will be
capable to automatically dial into a PC at a
central location using the telephone line and
transmit / display all the alarms (Fire /
Security / Fault). The software installed in the
PC at the central location will be capable to
email to key persons the status of the system.
This is very useful for Banks.
Besides the features offered, we can offer a
system to suit your specific requirement.
The Fire & Security Alarm Panel at the Branch
will be connected to various sensors like smoke
detectors, heat detectors, panic alarms, etc.
The panel which works on 230 V AC and 24 V DC
Standby battery indicates various alarms like
Fire, Break-in, Hold-up and faults like Open,
Short, AC Fail, DC Fail, Charger Fail, Battery
Low.
In case of an alarm including fault, the panel
automatically dials the Central Monitoring
Station and transmits the nature of alarm. The
Security Alarm System can be armed / disarmed /
silenced / reset through the key pad provided
password.
The PC at the Central Monitoring Station on
which the software is loaded will detect any
call from the Panel at the Branch and process
the signal received and accordingly display the
Alarm as the case may be.
The personnel at the Central Monitoring Station
can then through another software which is also
provided by us dial into the affected branch and
view the branch through the cameras installed at
the Branch. In case of a genuine alarm, steps
can be taken dependingly on the nature of the
alarm. In case of a false alarm, the system can
be silenced or reset accordingly.
This system used in combination with the Central
Monitoring System gives the best results in
security.
|