|
|
| |
|
Products |
|
|
Plunger Metering Pump :
| Model No |
FCP 5011 / 5017 / 5030 / 5040 |
| Pump Capacity |
0 - 10,000LPH |
| Discharge pressure |
0 - 400 lg / sq.cm. |
| M.O.C. (wetted parts) |
SS304 / SS316 /Alloy20 /PP/PTFE/GFT/ Hastalloy B/C |
These Positive displacement reciprocating pumps are provided with stroke adjustment mechanism to vary flow of liquid as per requirement. Accuracy of flow is controllable within + 1%. Of the two parts of the pump, the Drive End mechanism is enclosed in a housing filled with oil to minimise wear and tear. The Liquid End, being of critical importance, is made of material suitable for the liquid to be pumped.
These pumps are self lubricating type, capable of pumping fluids of any viscosity at constant pressure, irrespective of the suction pressure variations. Pumps for continuous flow are also designed and supplied by us as per your specification.
|
|
| |
|
| |
|
|
|
|
Diphragm Metering / Dosing Pump :
| Model No |
FCH 5011 / 5017 / 5030 / 5040 |
| Capacity |
0 - 10,000LPH |
| Discharge pressure |
100 kg / sq.cm. |
| M.O.C.(wetted parts) |
PP / PTFE / Hastalloy B/C |
| Diaphragm |
PP / FTFE / GFT |
The driving member in this pump is a flexible diaphragm. The advantage of this arrangement is elimination of all gland packings and seals which are exposed to the liquid being pumped. This is an important feature when used with hazardous, toxic or corrosive liquids.
Low capacity diaphragm pumps designed for metering service employs a plunger working in oil to actuate the diaphragm. Pumps of both single and double diaphragm can be offered. Diaphragm pumps with diaphragm rupture mechanism is also offered by us.
|
|
| |
|
| |
|
|
|
|
Metering Pump with Auto Controller :
| Model No |
FCP 5011 / 5017 / 5030 / 5040, FCH 5011 / 5017 / 5030 5040 |
| Pump type |
Plunger / diaphragm |
| Capacity |
0 - 10,000LPH |
| Discharge pressure |
0 400 kg / sq.cm. |
| M.O.C.(wetted parts) |
SS304 / SS316 / alloy20 PP / PTFE / Hastalloy B / C |
| Signal source |
4 - 20mA |
The system consists of the following :
Pump / Motor / Converter / Digital controller / Proximity switch. The pump can be controlled remotely giving an advantage while controlling the discharge as per your process needs. The stroke control can be varied such as Process temp., Pressure, Main Flow Rate, Level of liquid, Humidity, Viscosity, Concentration etc.
Accuracy of flow is within + 1%. The controller is used to rotate the thimble with the help of converter. |
|
| |
|
| |
|
|
|
|
Skid Mounted Chemical Dosing System :
These are Skid Mounted Injection Systems which can be directly connected to your process systems componants required for smooth & efficient dosing. All the componants are manufactured and listed before assembly under the supervision of qualified engineers.
Tank (capacity : as per requirement), Motorised agitator, Level gauge with protector, dissolving basket, Dosing pump with motor, Pulsation dampner, Pressure gauge, Pressure relief valve, Non-return valve, Strainer, Piping.
|
|
|
| |
|
|
|
|
Hydrostatic Testing Pump :
| Model |
FCP / 5011 / 5017 / 5030 / 5040 |
| Pump type |
Plunger |
| Capacity |
0 - 5,000 LPH |
| Discharge pressure |
0 -400 kg / sq.cm. |
| M.O.C.(wetted parts) |
SS304 / SS316 |
Accessories :
| Pressure relief valve |
Pressure gauge |
| Shut-off valve |
Dampner |
| Strainer |
Nipple |
| DOL Starter |
Mounting trolley |
|
|
| |
|
|
|
| |
|
|
|
|
Dosing System With Fixed Stirrer :
| Model |
FCP 5011 / 5017 / 5030 / 5040, FCH 5011 / 5017 / 5030 / 5040 |
| Pump type |
Plunger |
| Capacity |
0 10,000 LPH |
| Discharge pressure |
400 kg / sq.cm. |
| Stirrer |
As per tank size |
| RPM of stirrer |
As per requirement |
| Dia. / Swing dia |
As per specified tack capacity |
| M.O.C.(liquid head) |
As per liquid compatibility. |
| Accessories : |
|
| Dampner |
Strainer |
| Pressure relief valve |
Tank |
| Drain valve |
These are suitable for liquids which require continuous stirring. This saves the cost as a separate stirrer and of monitoring. Because of the simultaneous activities of dosing and stirring, there is saving on power consumption.
|
|
| |
|
|
|
| |
|
|
|
|
Multi Head Dosing System :
| Model No. |
FCP 5011 / 2H ( Duplex )
FCP 5011 / 3H ( Triplex )
FCP 5011 / 4TH ( Quadruplex ) |
| Capacity |
As per requirement. |
| Discharge pressure |
As per requirement. |
| M.O.C.( liquid head ) |
SS304 / SS316 / Alloy20 PP / PTFE / Hastalloy B / C |
| Motor |
3 Ph. 1440 RPM |
| End Connection |
Threaded / Flanged |
|
|
| |
|
|
|
| |
|
|
|
|
Jacketed Teflon Coated Pumps & Accessories :
Specifications :
| Model No |
FCP 5011 / 5017 / 5030 / 5040 |
| Pump Capacity |
0 - 10,000LPH |
| Discharge pressure |
0 - 400 lg / sq.cm. |
| M.O.C. (wetted parts) |
SS304 / SS316 /Alloy20 /PP/PTFE/GFT/ Hastalloy B/C |
| Model No |
FCH 5011 / 5017 / 5030 / 5040 |
| Capacity |
0 - 10,000LPH |
| Discharge pressure |
100 kg / sq.cm. |
| M.O.C.(wetted parts) |
PP / PTFE / Hastalloy B/C |
| Diaphragm |
PP / FTFE / GFT |
We design Jacketed Pumps for maintaining temprature of liquid being pumped. We offer Teflon Coated Jacketed Pumps for Highly Corossive Fluids. |
|
| |
|
|
|
| |
|
|
|
|
Electronic metering Pump :
Specifications :
| Electrical |
230 v A.C. ( + or -20%) 50HZ |
| Suction tubing |
4/6 mm |
| Discharge tubing |
4/6 mm |
| Dosing rate |
4/6/12 lph at 4 kg/cm2 |
| Strokes / Minute |
Max. 400 Min. 50 |
| Fuse |
600 m Amp |
| Level switch interlock |
Noramlly open |
| Relay output |
Normally open. Closes in case the pump stops for any reasons |
| M. O. C. |
|
| Pump Head |
Glass filled Noryl |
| Diaphragm |
Teflon |
| Connectors |
ABS |
| Suction tubing |
PVC |
| Discharging tubing |
PVC |
|
|
|
|
|
|
|
|
|
|
|
|
