Material Testing Instruments |
 |
| |
 |
| Parees Tech is founded by Engineers and technocrats with over 50 years of combined experience in the field of NanoTechnolgy, Electron Microscopy, Material/Polymer Testing..etc. |
| |
|
|
| |
| |
| Material Testing Division |
| |
|
| |
 |
| High Temperature Vacuum Furnaces |
| These furnaces are employed under vacuum / high vacuum, protective gases such as nitrogen / argon, but also with reaction gases like hydrogen and carbon monoxide. Furnaces For Special applications like Debinding, Sintering, Crystal growth, etc. |
 |
|
|
| |
| |
| Nano Technology Division |
| |
|
| |
 |
| Mask Less laser Based Lithography Systems |
| This very high-end equipment is made to your own specifications, it offers a capacity of pattern photoloithography with UV beam sizes and several UV laser sources (up to 3 different ones) selected from the range 0.5µm/100µm, with a large aspect ratio on an as yet undefined work surface (400mm x 400mm, 12 inches in diameter ... |
|
|
|
| |
 |
| Liquid Crystal Measurement Instruments |
| ALCT - the Automatic Liquid Crystal Tester has up to two independent channel, high voltage, arbitrary waveform function generators (±100V and 1MHz) and up to four real-time digital scope channels. The ALCT can perform automatic measurement of various liquid crystal parameters. VHR - the Voltage Holding Ratio Measurement System, RDC - the Residual DC Measurement System and Photo Detector are available too. Custom configurations for special measurements are also available. ... |
|
|
|
| |
 |
| Hot and Cold Stages |
| Instec's microscope thermal stages are designed specifically with liquid crystal applications in mind. Our heating and cooling stages offer many features which are unique in the market place, such as dual heating with variable sample chamber height, large viewing aperture, and easy electrical access to the sample. ... |
|
|
|
| |
 |
| Hot and Cold Chucks |
| Standard sizes of Instec thermal chucks range from 20mm to 300mm (custom sizes are available up to 600mm). Temperature ranges for standard models are available from -190ºC to 600ºC, with higher temperature limits available for custom hot chucks. Instec hot and cold chucks provide ultra temperature uniformity and stability (better than ±0.1ºC). An optional triaxial heater is available for eliminating electrical noise. The hot chuck surface is available as a grounded or floating surface. ... |
|
|
|
| |
 |
| Hot and Cold Plates |
| Standard sizes of Instec thermal plates range from 20mm to 300mm (custom sizes are available upon request). Temperature ranges for standard models are from -190°C to 600°C, with higher temperature limits available. Instec hot and cold plates provide ultra temperature uniformity and stability. Instec also offers gas tight covers for defrosting or gas purging. ... |
|
|
|
| |
|
| |
 |
| Liquid Crystal Cells & Cell Holders |
Various types of empty LC cells are offered by Instec for easy LC testing.
- Homogeneously aligned parallel, anti-parallel, and 90° twist cells
- In Plane Switching (IPS) cells aligned both parallel and perpendicular to the electric field
- Homeotropic (also known as vertically aligned) cells
- ITO patterned cells with no alignment layer at all
- Cells without PI for blue phase liquid crystals
|
|
|
|
| |
 |
| Microfluidic flow control system |
- The MFCS™-EZ is a unique pressure-based flow controller for micro-fluidic and nano-fluidic applications.
- Easy to install and use
- Easy to automate
- Fast and stable
- Field proven technology
|
|
|
|
| |
 |
| Flow-Rate Platform |
Fluigent Flow-Rate Platform is a unique tool to easily measure all the flow-rates in your fluidic system with the best precision
- Compatible with any flow controller
- Easy to set up and use
- High precision
- Tunable to your liquids
|
|
|
|
| |
|
