| |
| |
Wire-Wound Rheostats, Hand Sliding Type
|
|
|
|
4 Tubes Ganged Rheostat with
screw & knob 10 kw and above |
Double Tube Rheostats |
Rheostats |
|
| |
1) Core Porcelain Tube, Non-Magnetic Non-Inductive Tubular Type. Diameter and Length of coreis given in the table below.
2) Contact Block : Squire piece made of material is fitted with contact sliders in the guide squir rod. Bright chrome plated Phosphor bronze strip which makes immediate contact with the guide rod. A backlite knob is fitted with squire piece for sliding up and down.
3) Guide Rod : Solid draven brass rod bright chrome plated squire.
4) Contact Material : Multiple brushes of Phosphors bronze strip rolled strip give springy action to the contacts.
Winding Wires : Eureka wire for low value and nichrom wire 80/20 grade for higher values.
Temperature rise : 200oC above ambient temperature
High Voltage Test : 2 KV A.C. for 1 minute between end support and any one of 3 wires terminals of the wire.
End supports : Aluminium brackets painted.
Terminals : Bright Chrome plated brass nuts and screws one at each end of Leaneer Type Wire-Wound Resistor and the third one at both the side of guide rod.
All Electrical Connectors are made from chrome plated brass material.
Rotary Sliding Rheostate, Double tube and Multiple Tubes, Non-Standard values, wattage on specific request, Available from 100 Ma to 100 Amps 0.3 ohms to 25 Kohms. |
| |
|
| |
"ROHMS" Wire Wound Resistors
|
|
|
Wire-wound
Resistor with enclosure box |
Wire-wound Resistor |
|
| |
The 'RITEOHMS' RESISTORS are Manufactured after Research and planned development, Modern Manufacturing Techniques, Use of HIGH STANDARD Materials Quality Control. Proper Testing, Perfect design and process under the control of qualified and Technically well experienced hands.
'RITEOHMS' WIRE WOUND TUBULAR SILICON COATED RESISTORS
FEATURES :
Spot Welded Joints for reliability, Low temperature co-efficient, Low Surface temperature, Brackets available for Horizontal as well as vertical mountings, Exceptional Stability & Performance.
SPECIFICATION :
Ohmic Range 0.01 to 500K ohms. Tolerance ± 0.5%, 1%, 5% and 10%, Power Rating 0.5 W to 5000 W.
WIRE & WINDING :
Highest grade Nickel-chrome and copper Nickel Alloy wires are used Mechanically uniform, tension and required spacing. Single, Double Multiple Grade and Non-Inductive.
¡ TYPE OF RESISTORS
¡ Tubular Resistors
¡ Edge Wound Resistors
¡ Non-Inductive Resistors
¡ Ceramic Encased
¡ Fibre Card Resistors
¡ Mica Resistors
¡ Mat Resistors
RATING CONTINUOUS DUTY :
The rating given for each type of Resistor are based on a continuous duty service in free air and should be regarded as value for a single resistor mounted vertically in these conditions there will be a temperature rise of 300oC for Vitreous enameled and 200oC for silicon coated resistors. |
|
| |
| |
|
| TYPICAL RESISTANCE VALUES TOLERANCE ±10% CONTINUOUS CURRENT RATINGS AT 2800C TEMPERATURE RISE |
 |
OHMS |
0.5 |
0.6 |
0.75 |
1 |
1.3 |
1.7 |
2.2 |
2.8 |
3.5 |
4 |
5 |
6.5 |
9 |
13 |
16 |
AMPS |
28 |
24 |
20 |
16 |
16 |
14 |
11 |
11 |
9 |
9 |
8 |
6.5 |
5 |
3.8 |
3.2 |
CONSTRUCTION:
HIGH THERMAL CAPACITY GROOVED CERAMIC FORMER
OPEN TYPE WINDING
SELF LOCKING ROBUST TERMINALS
PHOSPHORUS BRONZE ADJUSTABLE BANDS. |
|
|
| |
| |
Dynamic Braking Resistors
|
(STAINLESS STEEL GRID RESISTANCE) |
|
| |
Continuous rating
current |
ohms |
Continuous rating
current |
ohms |
| |
|
|
|
| 11 AMPS |
2.00 |
55 AMPS |
0.100 |
14 AMPS |
1.00 |
62 AMPS |
0.080 |
14 AMPS |
0.750 |
80 AMP |
0.050 |
20 AMPS |
0.560 |
92 AMPS |
0.035 |
27 AMPS |
0.370 |
106 AMPS |
0.025 |
37 AMPS |
0.250 |
121 AMPS |
0.018 |
45 AMPS |
0.150 |
|
| |
|
| “ROHMS” Resistors type 'SS' are Manufactured from Stainless Steel (AISI 304) having temperature co-efficient of 0.094% per degC, wire formed grids, making them rustless, unbreakable and light in weight. there is provision at each grid to have a tapping, so that resistance value between steps could be altered. The required no of grids are put in series to get the required ohmic values. The assembly is supported of mica insulated steel rods with mica washers thus forming a stack. This stack of grid resistor can be mounted on a panel or steel rod is bolted to the two sides. |
|
| Contact Us |
| Address |
: |
A-12, Raj Industrial Complex, 2nd Floor,Military Road, Marol, Andheri (East),
Mumbai - 400 059, Maharashtra, India |
| Tel.No. |
: |
022 - 29201007 / 9820424812 |
| Email |
: |
 |
| Website |
: |
www.rheostatsandresistors.com |
|
| |
| Enquiry |
*
Indicates Compulsory Fields |
|
|
|
|
|
| |
|
| |
|
