|
|
|
Sacardande Engineers commenced operation as an independent inspection agency in the year 1983.
We developed ourselves as a reputed inspection organization during the last two decades ...... |
|
|
|
|
|
|
It is the policy of Sacardande Engineers to offer calibration services in the field of mechanical, metrological, force, torque and pressure measurement as per the documented quality system of the company in line with ISO/IEC 17025, maintaining at all times the traceability to the S.I. units through National or International Standards. We shall strive for continual improvement in our activities and shall endeavor to maintain
impartiality and a high degree of credibility while serving our customers.
|
|
|
About Us --- |
Calibration Services, Calibration Of Measuring Instruments, Vacuum Gauges Calibration, UTM & HTM Calibration, Mumbai, India |
Sacardande Engineers commenced operation as an independent inspection agency in the year 1983.
We developed ourselves as a reputed inspection organization during the last two decades providing inspection services in the field of process plant equipment machinery and components, right from the Raw material to Final stage of Assembly Testing & Certification.
During the course of work it was realized that there was an acute shortage of calibration services. As a first step towards closing the Gap for ISO 9000 requirements, we started our new venture of establishing Dimensional Metrology in 1998 and finally commissioned modern calibration laboratory in the field of mechanical measurement came into being in late 1998.
We achieved our Goal in Jan 2000, when we were accreditated by N.A.B.L. New Delhi, for the mechanical parameters. Our laboratory is situated on the First Floor of the building with total covered area of 1050 sq. ft. ( 225 sq ft for the calibration laboratory and 825 sq ft for support facilities. )
The entire laboratory is air conditioned with adequate controlled environmental conditions like temperature, humidity, dust etc.
Since last one and half year we added capability for calibrating thermal, electrical & force measuring equipment & instruments, besides thread gauges & angle measurements. |
|
|
Our Mission --- |
It is the policy of Sacardande Engineers to offer calibration services in the field of mechanical, metrological, force, torque and pressure measurement as per the documented quality system of the company in line with ISO/IEC 17025, maintaining at all times the traceability to the S.I. units through National or International Standards.
We shall strive for continual improvement in our activities and shall endeavor to maintain
impartiality and a high degree of credibility while serving our customers.
While we value each and every member of our organization and their contribution in our
endeavor, it is the responsibility of the members to acquaint themselves with the contents
of the Quality Manual and comply with the documented Quality system at all times. |
|
|
Personnel --- |
|
• |
Director / Q. Manager : Mr. S.S. Nemlekar is the Director and under his control all the activities, such as Administration, Technical and Marketing are carried out. He is a Technocrat with very long experience in the field of Metrological Inspection, testing and analysis.
He has completed the Lead assessors course and therefore the entire
Q. System are well designed to comply with N.A.B.L. requirements. He also imparts training to staff in all areas of the company activities. |
|
Tester :- With specialized training in calibration & inspection and long hands on experience.
Executive ( Customer Service ) : A Graduate with long experience in calibration, documentation & Inspection, Marketing with the organization. |
|
Accountant : Commerce graduate and experience in all types of commercial & accounts matters and transactions. Well trained in computer systems and Analysis and maintaining training systems. |
|
Internal Auditing is carried out by external, professionally qualified and long experienced technocrats, in this field for at least 2 times a year covering all the parameters as per ISO requirements. |
|
|
|
Services --- |
|
• |
Pictures : Calibration of Mechanical measuring instruments of all types and Ranges including pressure & Vacuum Gauges. UTM & HTM, force measuring instruments, shore A & D, Torque wrench .
|
• |
Inspection of components, fixtures and product validation. |
• |
Inspection services in the field of process plant Equipment, Machinery & Components, right from the stage of Raw material identification, precision inspection to final assembly, trial testing & Certification. |
|
|
|
List of Measuring Instruments We Calibrate |
• |
All types of External, Internal & Depth Micrometers. |
• |
All types of Vernier Calipers. |
• |
All types of Plunger & Lever Dial Indicators. |
• |
Bore Gauges. |
• |
All types of Vernier Height Gauges. |
• |
All types of Plain Plug, Ring, Pin & Snap Gauges, feeler Gauges. |
• |
All types of Internal, External Dial Calipers, Dial Thickness Gauges & Dial Depth Gauges. |
• |
All types of Straight edges, Angle Plates, ' V ' Blocks, Sine Bars & Engineer's Squares. |
• |
Steel Scales & Measuring Tape.. |
• |
Bevel Protractors & Combination sets. |
• |
Spirit Levels. |
• |
Micrometer Standards ( upto 0-1000 mm ) |
• |
Pressure Dial Gauges / Digital Gauges {Inhouse} |
• |
Vacuum Dial Gauges |
• |
Rubber Hardness Tester Shore A & D. |
• |
Torque Wrench. |
• |
Force: Universal Testing Machine & Hardness Testing Machine, Force Measuring Instruments. |
• |
All types of thread plug gauges, thread ring gauges. |
|
|
|
Contact Us --- |
|
M/s. Sacardande Engineers |
Contact Person |
: |
Mr. S.S.Nemlekar (Director) |
Mobile |
: |
09987264949 |
Contact Person |
: |
Mr. Pramod Jawdekar |
Mobile |
: |
09987264947 |
Address |
: |
Lab : 113,P.N. Kothari Estate, L.B.S. Road, Near Asian Paints, Bhandup (West),
Mumbai - 400 078, Maharashtra, India. |
Phone |
: |
022-25667496, 25667241 |
Telefax |
: |
022-25665518 |
E-mail |
: |
|
Website |
: |
www.sacardande-lab.com |
|
|
Feedback --- |
|
*
Indicates Compulsory Fields
|
|
|
|
|
|
|
|