 |
| |
Industrial Heater, Industrial Electrical Heaters, Flameproof Industrial Heaters, Heaters Imersion, Heating Elements, Ceramic Band Heaters, Mica Band Heaters, Strip Heaters, Plate Heaters, Cartridge Heaters, Density Cartridge Heaters, Finned Ship Heaters
|
|
| |
The Right Source For All Types of Electrical & Industrial Heaters Like
• Ceramic Band Heaters
• Mica Band Heaters
• Energy Saving Ceramic & Mica Band Heater
• Strip Heaters & Plate Heaters
• Cast - In Heater
• Low / Medium Watt Density Cartridge
• Square Shape High Density Cartridge Heaters
• Bobbin Heaters
• SS Heaters
• Titanium Heaters
• Silica Heaters
• High Density Cartridge Heaters
• Micro Tubular Coil Heaters
• Coil Type Nozzle Band Heaters
|
|
|
| |
|
|
| CERAMIC BAND HEATERS |
| |
| |
Cerramic Band Heater Consist of a Gelically Wound Resistance Coil Made From Nichrome 80/20 Wire, Evenly Stretched And Percisely Strung Through A Steatite Insulating Bricks Forming A Flexible Heatign Mat. The Ceramic Heating Mat Along With 6 mm Thick Ceramic Fiber Insulation Is Assembled In S. S 304 Sheet
APPLICATIONS
Injection Molding M/cs, Plastic & Rubber Extruders, Dies, Drum Heating, Blow Molding M/cs.
|
 |
|
Wattage : ± 5%
Voltage : 230 Volts / 415 Volts
1Ø / 3Ø
Dia. : 40mm & up
Width : 30mm & up
• Higher Watt Density
• Higher Productivity
• Higher Operating Temperature |
|
|
|
|
| |
| MICA BAND HEATERS |
Design Consist of Nichrome Resistance Rbbon Proecisely Wound, Evenly Spaced on an Inorganic Mica Sheets. Our Exclusive Computer Softwate Designing Maximizes The Element Ribbon Coverage of The Heated Area, Which Results in Uniform Heat distribution. The Ribbon Wound Mica Former Insulated With Mica Sheets is then Covered With SS/ GI Sheets.
APPLICATIONS
Injection & Blow Molding M/cs, Extruders,
Dies, Drum Heating |
|
|
Wattage : ± 5%
Voltage : 230 Volts / 415 Volts
1Ø / 3Ø
Dia. : 25mm & up
Width : 30mm & up |
|
| |
|
• Most Economical
• Faster Heating up and Cooling Down Possible |
|
|
|
|
|
|
| |
| ENERGY SAVING CERAMIC & MICA BAND HEATER |
This is a superior design to save powr up to 30%. The Energy saving is achieved by using 2" thick ceramic wool blanket insulation from the outer surace of the heater. The overall outer diameter increases by 4". The low thermal conductuvity of the ceramic biber keep the outher surface temperature up to 60° to 80° C, Which reduces heat losses to atmosphere.
ADVANTAGES
• Reduce Electricity Bill
• Reduce Power Load
• Saves Energy Up to 30%
• Reduce Preheating Time
• Cool Working Atmosphere
• Increases Productivity
|
|
|
|
|
|
| Top |
| STRIP HEATERS & PLATE HEATERS |
MICASTRIP / PLATE HEATER
Nichrome Ribbon Wound on Mica Former & Insulated With Mica Sheet, Which is Then Sheathed In MS Plated or SS Sheet
CERAMIC / REFRACTORY PLATE / STRIP HEATER
Heating Coil Supported In Fluted Refractory Insulators And Sheathed in SS / MS Plated Sheets
FINNED STRIP HEATERS
Basically Fins of Sizes 65mm x 35mm Are Fitted Tightly on The Heavy Duty Strip Heaters For Fast Transfer of Heat to Flowing air.
APPLICATION
Best Suitable For Uniform Heat Transfer To Flat Surfaces. Rubber Moulding M/c. Hot Plates
|
|
|
| |
| CAST - IN - HEATERS |
CONSTSRUCTION
Tubular Heating Elemets Embede In Aluminium Alloy or Brass, Providing Uniform Heat Transfer And Long Life. The Heater Can Be Manufactured With Cooling Tubes For Accurate Temperatures Control.
Aluminium :4000C Max
Cast Heater Advantages
• High Thermal Conductivity-Fast Heat Tranfer
• Exceptionally Long Life.
• Accurate Temperatujjre Control.
• A Leakage In The Machines Not Affects The Life |
|
|
APPLICATIONS
Extrudes, Laminating, Injection Molding Vaccum Forming & Packaging Machines, Extrusion Die Heads & Gear Pumps, Compression Molding, Heat Sealers, Food Processing, Pharmaceutical Packaging Machines Rubber Presses |
|
| • Additonal Treatment Such As Teflon Coating Heat Treatment Can Be Done |
|
| |
|
|
|
|
| |
| LOW / MEDIUM WATT DENSITY CARTRIDGE |
Low / Medium Watt Density Cartridge Heaters Are Manufactured In SS / Brass Tube. Resistance Wire Helical Coil Evebkt Stretched And Strung Through A Steatite Insulator, MGO Powder Filled In Remaining Space Inside The Tube & Insulator To Increase Thermal Conductivity & Life.
APPLICATIONS
Heating of Dies, Moulds, Platens, Die Heads, Packaging Machines, Sealing & Cutting Jaws
|
|
|
|
|
|
| Top |
| SQUARE SHAPE HIGH DENSITY CARTRIDGE HEATERS |
Square Shape High Density Cartridge Heaters Are Specially Developed For Those Application Where A Drilled Hole Is Not Pracitacl. Heating Coil Wound Around A Ceramic Core And Isolated From SS/Incoly Sheath by Highly Compressed Layer of Magnesium Oxide Power. These Heater Are Ideal For Milled Slots In Long Platens Where Drilling A Long Hole Is Not Possible. These Heaters Gives More Surface Contact Per Running Inch Than Round Cartridge Heaters or D Shape Heaters Giving Longer Life.
Std. Size : 15.5 x 15.5, 14 x 14, 8 x 8 MM
APPLICATIONS
Bag Sealing, Heating of Long Platens, Cutting Jaws, Heating of Shell Moulds In Foundries.
|
|
|
|
|
|
| |
| BOBBIN HEATERS |
For Heating Water, Oils, Chemicals, Plating Solutions
Construction
Open helical coils of high resistance wire evenly stretched and lay through fluted refractory bobbins. These heating elements are then inserted into 1" of higher diameter metal pipes which are welded to liquid tanks.
Application
For heating large quantities of liquid and water solution, alkali, fuel, oil, mineral, and vegetable oils, chemicals, plating solution tanks.
|
|
|
|
|
|
| Top |
| SS HEATERS |
Used For Alkaline Solutions & Water Heating
Construction
Made from SS / Titanium tubbing with replaceable Bobbin Type heating elements inside, provede with mounting plate and terminal box.
Application
• Titanium - for vertical use for Nitric and Chromic acid Solution.
• SS - 304 - Alkaline Solution.
• SS - 316 - Phosphating Solution.
|
|
|
|
|
|
| |
| TITANIUM HEATERS |
Used For Nitric & Chromic Acid Solutions
Construction
Made from SS / Titanium tubbing with replaceable Bobbin Type heating elements inside, provede with mounting plate and terminal box.
Application
• Titanium - for vertical use for Nitric and Chromic acid Solution.
• SS - 304 - Alkaline Solution.
• SS - 316 - Phosphating Solution.
|
|
|
|
|
|
| Top |
| SILICA HEATERS |
Used For All Acids, Ferric Chloride Etching, Anodising Chemical Heating Exvept Hydrofluoric & Phosphoric Acids
Construction
Made of imported fused silica tubing with removable heating elements inside provided with heat resistant rubber cap and a connecting cable.
Application
For vertical use at higher temparature in all acids, ferric chlorideetching Baths anodizing, bright dip baths, except hydrofluoric and phosphoric.
|
|
|
|
|
|
| |
| HIGH DENSITY CARTRIDGE HEATERS |
| High Density Cartridge Heaters Are Mahufactured By Special Manufacturing Techniquie. Heating Coil Wound Around A Ceramic Core And Isolated From SS/Incoloy Sheath By Highly Compressed Layer of Magnesium Oxide Powder. Beacuse of Exclusive Manufacturing Technique These Heaters Gives Longer Life Compare To Other Cartridge Heaters And Can Be Operated At Higher Temperatures. Also It Is Possible To Give More Wattage In The Small Sizes |
| High Density Cartridge Heaters Can Be Supplied With Built In Thermocouple Sensor And Distributed Watt Density Cartridge Heaters. |
|
|
| |
| Std. Dia. - 6,8,9,5,10,12,12,7,14,15,16,19,20,22,25,28,30 MM |
| |
APPLICATIONS
Heating of Dies, Moulds, Platens, Die Heads, Packaging Machines, Sealing & Cutting Jaws. |
|
|
|
|
| Top |
| MICRO TUBULAR COIL HEATERS |
Micro Tubulr Coil Heaters Are Small Section Heating Elements That Can Be Shaped In Small Space Which Allows High Wattage In Samall Spave. Heaters Are In Round, Square Or Rectangular Section. These Heaters Are Designed To Work In Most Difficult Conditions Giving Very Good Heat Transfer & God Reliability. |
| |
Coil Heaters Can Be Given With Inner & Outer SS/Brass Sheath And Cast In Aluminium Or Brass Material.
| |
 |
|
Cross Section -Round 3.8, 6, 6.8, 4 MM
Square 3.3 x 3.3, 4 x 4 MM
Rectangular 4.2 x 2.4, 4 x6.5, 8 x8, 6.6 x 6.6 MM |
| Can Be Supplied With In - Built Temperature Sensor J or K Type. |
| Application : Hot Runner System, Hot Stamping, Plastic Riveting, Manifold |
| Runner Less Moulding - Saving Plastic Material |
| |
|
|
|
|
| |
| COIL TYPE NOZZLE BAND HEATERS |
Coil Type Nozzle Band Heaters Are Specially Designed To Prevent The Failure of Heaters Against The Leakage of Plastic Material At Nozzle Point Which Is Required For H.D. Plastic Such As Nylon, ABS, Delrin
Outer Sheath - SS Inner Sheath -Brass / Aluminium / SS
Diameter - Min.25 MM Length -Min. 25MM
Thickness -10 / 12 MM
Can Be Supplied With In - Built Temperature Sensor J Or K Type.
|
|
|
APPLICATIONS
Heating of Nozzle of Plastic Moulding & Extrusion M/C, Hot Stamping, Plastic Riveting |
| |
• More Life, Higher Temperature
• No Failure Against Leakage |
|
Custom Built Heating Systems For Water, Air, Oil & Gas with Control Panels
|
|
|
|
|
| |
| We are Specialist in import Substitute Heaters, Built in Thermocouple Heaters, Al-cast Heaters with Cooling Tube & Distributed wattage Cartridge Heaters |
| |
Electro - Heat Controls and Saket Enterprises are leading manufacturer of all types of
electrical Industrial heaters, temperature sensors and heating systems. We have started our operation in the year 1992. Over the last few years we have become preferred source of Industrial Heaters, sensors and heating systems by totally satisfying our customers with superior products, Quick Delivery of specials as well as standard product and good technical support.
To earn the customer trust as preferred supplier, we totally satisfy the customer by delivering
quality heaters on time at reasonable prices suitable to the requirement and maximum application temperature having proper watt density. To accomplish this we share our technical and practical experience with the customer, suggest suitable heater to their application. |
|
|
| Top |
|
| |
Works : |
: |
S. No. 48/13, Manaji Nagar, Next to Nawale Hospital, Katraj - Dehuroad
Bypass Highway, Narhe, Pune - 411041., Maharashtra, India. |
Office |
: |
Nikhil Heights, Flat No.5,
Sinhagad Road., Vadgaon (Bk),
Pune - 411 041, Maharashtra, India. |
Telefax |
: |
+ 91 - 20 - 2439 2168 |
| Mobile |
: |
+ 91 - 94220 86028, 92256 50680 |
Website |
: |
|
 |
| |
|
|
|
|
| Top |
|
| |
* Indicates Compulsory Fields |
|
|
|
| Top |
| |
| |
|
| |
|
