Products
 

Anti Corrosion Coatings

PRODUCT

:-  ANTICOR SK-03
FUNCTION :-  Single component, air drying, Self-Priming, Anti corrosion coatings for ferrous and non ferrous metals
CHEM.COMP. :- Thermoplastic copolymer
COLOUR :- As desired
 
FEATURES:
  1. One Component, Ready to Use System
  2. Excellent Water repellency and lowest moisture absorption
  3. Resistance to  Acids, Alkalies, and Chemicals
  4. Good abrasion and scratch resistance
  5. Thermally Stable up to 2000 C
  6. Quick drying at room temperature
  7. Good U.V. Radiation resistance.
  8. Greater surface coverage.
 
UNIQUE ADVANTAGES:
1. Single Pack – Ready to Use System- No mixing operation
2. Quick Drying at Room Temp.- No need of Oven Baking
3. Self Priming – No need to Apply Primer
 
BENEFITS:
1. Saves Cost - Economical Than Conventional, Protective paint systems, No Wastage of paint
2. Saves Labor – Speedy Operation
3. Saves Time – Quick Drying Properties, Reduces Delivery Time, Increases Production
4. Increases Safety with Flame Proof Grades
---------------------------------------------------------------------------------------------------------------------------

Electrical Insulation Coating

PRODUCT

:-  INSULET SK-03
FUNCTION :-  Single component, air drying, Self-Priming,
 Electric Insulation Coating For Electrical and Electronic Industries.
CHEM.COMP. :- Thermoplastic copolymer
COLOUR :- Red, Yellow, Blue & Clear
 
UNIQUE FEATURES :
  1. One Component, Ready to Use System
  2. High Electric, strength :- 55 Kv / mm
  3. Excellent Oil Resistance
  4. Excellent Flame Retardancy
  5. Resistance to  Acids, Alkalies, and Chemicals
  6. Good abrasion and scratch resistance
  7. Thermally Stable up to 2000 C
  8. Quick drying at room temperature
  9. Effectively coats sharp edges, projections of the surface to be applied. 
 
ADVANTAGES :
  1. Simple application by Brush or Spray technique
  2. Single handed operation; No skill manpower
  3. No special surface treatment before application
  4. Application on surfaces having any geometry eg. Busbar bends, Fish Plates, Radiator Fuses etc.
  5. Cost effective as compared to conventional methods.
 
APPLICATION :
Transformer
a) Reduce Tank Clearance.
b) Reduce Insulation Between Frame And Core
c) Reduce Insulation Between H.V & L.V. Leads.
d) Reduce Clearance Between Bushing To Termination Box.
e) Reduce Clearance Between Bare Bushing And Conservator.
f) Reduce Clearance Between Terminals In Air/Oil .
g) Protect Epoxy Terminals/Post Insulator Form Uv Rayes. 
 
 1.Electrical equipments where phase to phase / phase to earth clearances are critical.
 2. To form insulated Bus - bar systems.
 3. For indoor as well as outdoor installations to avoid flashovers due to vermin or moisture entry.
 4. To reduce the leakage current through the body of outdoor as well as indoor installations.
 
INDOOR APPLICATIONS
  • Application on Bush on, Raisers and Breakers Arms.
  • Application on Bus Bars in Control Panels to increase electrical strength
  • As an Ideal Replacement of PVC insulation sleeves on Bus bars in control panels
 
Outdoor Applications :
  • Feeder Pillars - On Bus bars and terminals to avoid flashover due to rains or vermin entries.
  • Pole Junctions and current carrying wires to avoid Bird faults and to prevent illeagal connections.
 

Aquashield System For Exterior Walls
Polymeric Based Waterproof Coating
Features :
• Excellent ater repellency.
• Excellentr esistance to U.V.Radiation.
• Resistance to moss & fungus.
• No peel-off tendency.
• Tough & Scratch-proof.
• Excellent rightness and finish.
 
Advantages :
[ Offers Unique THREE IN ONE advantage ].
Prevents leakage  / seepage completly.
Enhances life of structure by virtue of excellent water repellant properties of polymer coating.
Adds aesthetical out look to structure with variety of colour shades.
 
HOW IT WORKS:
During application, polymer solution travels into the surface, occupies all the cavities, hairline cracks and on solidification forms polymer crystals. These crystals seal every path of water and make the entire surface waterproof. It is important to note that the system does not forms any film or layer over the surface but gets absorbed and become an integral part of the surface with ni peel-off tendency.
 
 

PMT ( Polymer Membrane Technology )
[ Waterproofing Treatment For Slabs / Terrace / Sloping Roofs ]
 
Polymer Membrane Technology [PMT] is an advanced form of waterproofing treatment for slab, terrace &  sloping roofs of old & new structures. Membrane is a special type of flexible fibre having specific grain structures with high polymer absorbing characteristic. The complete soaking of polymer in flexible fiber having specific grain structures with high polymer  absorbing characteristic. The complete soaking of polymer in flexible membrane ensures excellent adhesion with subsrate and adds  strength to the membrane Flexibilty of membrane absorbs expansion / contraction of concrete surface without breaking away from substrate. Polymers used in the process are "Thermoplastic Co-polymer" type having excellent resistance to U.V.radiation, abrasion & moisture." 

PMT is tough, lasting & effective process pf avoiding leakages. The advantages of the 
system are as follows.

Advantages :
Non-Destructive process; No damage to structure & no change in original structure.
No increase in weight; safe for structure.
Requires no curing after application.
Ready to use system; minimum scope for human error.
Quick and convenient process.
Enhances better cooling effect.
Anti Corrosion Coatings | Electrical Insulation Coating |
Aquashield System For Exterior Walls | PMT ( Polymer Membrane Technology )
---------------------------------------------------------------------------------------------------------------------------
WEBSITE :-  www.skformulations.com / www.anticorrosioncoating.in
Promoted by : GID