Products :-

Ultrasonic Thickness Gauge

Useful For Steel ( Mild Steel, Stainless Steel, Cast Steel,
Cast Iron And Alloys ) Aluminum, Copper, Lead, Tin, Brass, Alloys,
Plastics ( PVC, PP, LDPE, HDPE ) & Glass Ceramic


Ultrasonic Thickness Gauge Portable Model DT1-C & DT1	Ultrasonic Thickness Gauge Pocket Model DT2-C & DT2

Features :-

*	Easy to operate.	*	Digital readout eliminates human error.
*	Quick and reliable.	*	Compact, portable and battery operated.
*	Handy and sturdy.	*	Can be used by unskilled operator.
*	Accurate, one touch, light.	*	Simple and quick calibration on all materials.
*	Stable read-out to the last digit	*	Automatic switch-off circuit for more battery life.
*	Option of LCD and LED display	*	Works remarkably well even on rough and curved surface.
*	High penetration power.	*	Highly reliable due to modern solid state technology.
*	Non-destructive, instant thickness.	*	Choice of rechargeable Ni-Cd cells and dry cells.
*	Measures thickness from only one side.

Advantages of Ultrasonic Thickness Gauge :-

*	Quick thickness measurement of parts accessible from one side only.
*	Accurate measurement of remaining wall thickness on wear parts.
*	Reliable corrosion inspection and control to guarantee the production process.
*	Preventive maintenance by early detection to avoid consequential losses.

Description :-

Magasonic Industries manufacture Ultrasonic Digital Thickness Gauges meant for precise measurement of wall thickness using ultrasonic echo principle. The instrument is supplied with a probe and Calibration Master for MS on which the instrument is to be calibrated with a drop of oil as a couplant. After calibration the instrument is ready to check thickness of MS articles just from one side with use of oil as couplant. The probe creates and transmits ultrasonic pulses from the top surface of the test-piece and after traveling through the material they are reflected at the bottom surface back to the probe. As speed of ultrasonic waves vary with material a Calibration Master for that material ( other than MS ) is needed which is supplied as optional accessory.

The instrument display's instantly the thickness of the test-piece with reading in digits with accuracy + 0.1mm. It also find out thinning due to bending, forming, drawing and detects manufacturing defects like laminations, folds, voids in plates. It helps to find out the remaining wall thickness of pipelines etc. just from one side without counting the rust, scale formation on the other side.

The Standard Probe DG-210 supplied with instrument is used for plane and curved surface like pipeline, gas cylinder etc. for higher diameter objects. Low Curvature Probe is used for smaller diameter pipelines and Finger Tip Probe is meant for readings in congested areas.
LCD Models ( DT2-C & DT1-C ) have bright light as well as low ambient light visibility are meant for outdoor as well as indoor applications. LCD Models are recommended which consumes less power as compared to LED Models ( DT2 & DT1 ) unless measurements are always to be taken in very dark areas.

Ultrasonic Probes :-

DG - 210    : Standard Probe : For plane and externally curved surface like pipes, cylinders of outer
                       diameter more than 50mm.
DC - 210    : Low Curvature Probe : For smaller diameter curved surface like pipes with outer diameter
                        between 25 to 50mm.
DF - 206    : Finger Tip Probe : For closely spaced or congested areas.

Type	DG - 210	DC - 210	DF - 206
Nomenclature	Standard	Low Curvature	Finger Tip
Thickness Range in Steel ( mm )	1.5 to 100.0	1.5 to 10.0	1.5 to 10.0
Surface	Flat & Curved ( Above 50mm in dia. )	Only curved	Restricted
Curvature Range ( mm )	OD 50mm & above	OD 25 to 50mm	OD 50mm & above
Sensing Face Diameter ( mm )	10	10	6
Probe Size ( mm ) Dia X Height	Ø 15 X 30h	Ø 15 X 30h	Ø 11 X 40h
Maximum Surface Temp. (C)	- 25 to + 70	- 25 to + 70	- 25 to + 70
Couplant	Ordinary Oil, glycerin.	Ordinary Oil, glycerin.	Ordinary Oil, glycerin.

All probes are supplied with cable and 5 pin connecter at one end.

TECHNICAL SPECIFICATIONS ( IN STEEL )	Pocket Models		Portable Models
Models	DT2-C	DT2	DT1-C	DT1
Measurement Range	1.5mm to 100.0mm
Measuring Accuracy	+ 0.1mm
Minimum Thickness Measured	1.5mm
Probes	DG- 210 - Standard ( 2 MHz ), Optional DC - 210 - Low Curvature, DF - 206 Finger Tip.
Test Frequency	2 MHz
Batteries	7.5V DC i.e 5 No. of Pencil Size ( AA ) cells		9V DC i.e 6 No. of Medium Size (C) cells.
Low Battery Indication	Decimal Point in display blinks		Decimal Point in display and front panel LED blinks.
Dimensions ( Approx. )	80mm X 155mm X 38mm ( W X H X D )		195 mm X 65 mm X 140 mm ( W X H X D )
Weight ( Approx. )	400 gm including batteries		1.5 kg including batteries
Display	LCD	LED	LCD	LED

High Precision Thickness Gauge

High Precision Thickness Gauge Useful For Mild Steel, Stainless Steel, Cast Steel,
Cast Iron, Alloys, Aluminum, Copper, Lead, Tin, Brass, Alloys, Plastics
( PVC, PP, LDPE, HDPE ) & Glass Ceramic.

Advantages of Ultrasonic Wall Thickness Measurement

*	Quick thickness measurement of parts accessible from one side only.
*	Accurate measurement of remaining wall thickness on wear parts.
*	Reliable corrosion inspection and control to guarantee the production process.
*	Preventive maintenance by early detection to avoid consequential losses.

Top

| Ultrasonic Thickness Gauge | | High Precision Thickness Gauge |

Website : www.megasonicindia.com

Designed & Hosted by : MID Promoted by : GID

Ultrasonic Thickness Gauge

Advantages of Ultrasonic Thickness Gauge :-

High Precision Thickness Gauge

High Precision Thickness Gauge Useful For Mild Steel, Stainless Steel, Cast Steel, Cast Iron, Alloys, Aluminum, Copper, Lead, Tin, Brass, Alloys, Plastics ( PVC, PP, LDPE, HDPE ) & Glass Ceramic.

High Precision Thickness Gauge Useful For Mild Steel, Stainless Steel, Cast Steel,
Cast Iron, Alloys, Aluminum, Copper, Lead, Tin, Brass, Alloys, Plastics
( PVC, PP, LDPE, HDPE ) & Glass Ceramic.