|
|
|
 |
 |
 |
| |
| |
Products |
| |
|
Composite Walls Apparatus
The unit demonstrates the thermal conductivity at various heat inputs and different configurations. The apparatus consists of a heater sandwiched between two identical composite slabs. Water-cooled heat sinks, to steady state heat transfer condition achieved earlier. Provides MS, Al. and Bakelite plates and necessary meters on control panel.
Heat Transfer Through Lagged Pipe
The unit explains the Thermal conductivity and characteristics of lagging material, using three concentric pipes and a heater and two types of lagging materials are filled up. Thermocouples and dimmer state measures various temperatures and heat inputs |
| |
|
|
| |
|
Refrigeration Cycle Demonstrator
The unit is useful to calculate power consumption & theoretical & actual COP of the system. A hermetic compressor, air-cooled condenser, capillary tube as expansion devices & evaporator, heater in evaporator simulates heat load. Measurement – condensing pressure, evaporating pressure, input to compressor heater.
General Ccycle Refrigeration Trainer / Tutor
The unit is useful to calculate Actual COP, Theoretical COP, Carnot COP & heat transfer co-efficient in evaporator and also demonstrates use of controls in refrigeration cycle. A hermetically sealed compressor using R-12 refrigerant, air-cooled condenser, evaporator with water as medium & Heater, Rotameter for flow measurement, thermostatic expansion valve with solenoid valve. |
| |
|
|
| |
|
Centrifugal Pump Test Rig
To study the performance of pump at various discharge heads
Multistage Centrifugal Pump Test Rig
To study the performance of two stage centrifugal pump
Reciprocating Pump Test Rig
Gear Pump Test Rig
To study the performance of gear pump
Pelton Wheel Turbine Test Rig
To visualise the operation & estimate B.H.P. & W.H.P and various Efficiencies of pelton turbine.
Kaplan Turbine Test Rig
To study the performance of Kapalan Turbine |
| |
|
|
| |
|
Single Cylinder Diesel Engine Test Rig
The test rig provided to study of a diesel engine testing. The rig comprises of a four-stroke diesel engine coupled to a rope brake for variable speed or electrical dynamometer. The test rig can determine BHP, IHP, mechanical & thermal efficiencies, air fuel ratio, specific fuel consumption and heat balance sheet at various loads
Twin Cylinder Diesel Engine Test Rig
The test rig provides study of a diesel engine testing. The rig comprises of a four-stroke diesel engine coupled to a rope brake, electrical or hydraulic dynamometer. The test rig can determine BHP, IHP mechanical & thermal efficiencies, air fuel ratio specific fuel consumption and heat balance sheet at various loads |
| |
|
|
| |
|
Reynoulds Apparatus
To study the principle of laminar & turbulent flow and determination of Reynolds number for various flow rates
Verification Of Bernoulli’s Theorem
To study Bernoulli’s theorem can be verified by calculating the energy and head of water at different sections
Flow Over Notches / Weir Apparatus
Notch is fitted water is supplied at one end of channel over the notch. A Settling chamber with dampers is provided at the beginning Of flow channel to reduce the pulsations and to settle the flow
Flow Through Orifice & Mouthpiece
To study Cd, Cc, & Cv of orifice as well as Cd of mouthpiece
|
| |
|
|
| |
| |
| Kaplan Turbine - Kaplan Turbine Test Rig 5hp ( Closed Circuit ) |
Vertical shaft Kaplan turbine designed to develop 5HP at 1500 rpm, complete set with a flow of 5000 LPM at 5mtr. Supply head, complete with rope brake arrangement, pressure measuring device, dead weights or electrical loading with energy meter for conducting experiments in S.I. units.
Switch and starter for the above pump set.
Piping system consisting of pipes, Valves and fittings complete set for the Kaplan turbine test rig.
Rigid mild steel frame work, compactly fitted with all the above items as a self sufficient package unit, suitable for operation without any foundation.
Flow measuring unit consisting of venturi meter and a double column differential manometer with stand.
Mild steel sump to store sufficient water for independent circulation through the unit for Experimentation and arranged within the floor space of the main unit.
Supply pump set for the above consisting of a pump of size 250 mm to discharge 6000 LPM at 8 m total head coupled with a 15 HP motor suitable for operation on 3 phase 50 cycles 400 V AC supply.
Digital tachometer.
|
 |
| |
|
|
|
 |
 |
 |
|
| |
| Home I Company I Products I Contact Us I Feedback |
| |
|
|
