AUTHORISED DEALERS FOR
* Ferrous & Non Ferrous Welding Electrodes 
* Solid Wires for TIG / MIG Welding 
* Bare & Flux Coated Brazing Rods 
* Welding Accessories & Equipments 
* Special Electrodes viz. Inconel, 
   Nickel, Monel, Cupronickel, Stellite etc. 
* Cold Welding Compounds 
* Water Soluble (Dissolving) Purge Paper & Tape
Authorised Dealers Welding Wires, Welding Electrodes, Welding Equipments, Bare Rods, Welding Accessories, Flux Coated Brazing Rods, India

Profile
Products
Enquiry
Contact Us

Authorised Dealers For, Ferrous & Non-Ferrous Welding Electrodes, Welding Accessories & Equipments, Solid Wires For TIG/MIG Welding, Bare & Flux Coated Brazing Rods, Special Electrodes Viz.Inconel, Nickel, Monel, Cupronickel, Stellite, Cold Welding Compounds.

Products

Value for Our Customers....Elmech Engineers offers a wide selection of wire & Welding products for Arc welding, Tig Welding, Brazing, Cold Welding. As the leading Suppliers for Many Products manufactured by reputed Indian & International Companies, Elmech Engineers is respected for their quality....their technical expertise....and reliable customer service. We strive to work closely with our customers, bringing value to their products.
Welding Wire & Covered Electrodes Our product range consists of welding wires and coated electrodes in stainless steel, nickel, nickel based alloys, 
special purpose types together with a number of mild steel and low alloy steels.

     Electrodes

  • Nickel & High Nickel Alloy Electrodes
  • Stainless Steel Welding Electrodes

     Welding Wires

  • Mild & Low Alloy Steel Wires
    Nickel & High Nickel Alloy Welding Wire
    Stainless Steel Welding Wire
  • Flux Cored Wire

AWS A5.15 ENi-Cl                  

This Electrode is designed for welding of gray iron castings to themselves as well as joining them to mild steel or stainless steels. It is also used extensively to repair castings. The welds are quite machinable. A preheat and interpass temperatures of not less than 350 degrees F is recommended during welding.

Typical Chemical Composition of the deposit:

Carbon                    .85
Manganese            .25
Silicon                   1.73
Iron                           4.2
Copper                   1.45
Nickel                   91.50
Sulfur                      .005
Phosphorus           .015

Mechanical Properties of all weld metal (as welded):

Tensile Strength            72,000 PSI   500 MPA
Yield Strength               56,500 PSI   390 MPA
Elongation                     5%
 
AWS A5.11 ENiCrMo-3           

This Electrode is a covered electrode which is used to weld nickel-chromium-molybdenum alloys. It is also used extensively in overlay cladding where similar chemical composition is required on the clad side. Its applications include dissimilar joints between nickel-chromium-molybdenum alloys to either stainless steels, carbon, or low alloy steels. These electrodes are used in applications where the temperature ranges from cryogenic up to 1800 degree F.

Typical Chemical Composition of the deposit :

Carbon                    .03
Manganese            .35
Silicon                     .34
Iron                           1.5
Sulfur                     .005
Phosphorus          .009
Chromium            21.5
Molybdenum          9.2
Columbium +
Tantalum               3.55
Aluminum               .1
Titanium                .09
Nickel                 Balance

Mechanical Properties of all weld metal (as welded) :

Tensile Strength            114,500 PSI   790 MPA
Yield Strength               89,500 PSI   620 MPA
Elongation                     34%


Enquiry

Send your enquiries here
* Indicates Compulsory Fields
Name of Company : *
Name of Contact Person :*
Designation :
Address : *
City : *
Pin Code :
Country :*
(if Other Please Specify:)
State :
(if Other than India State Please Specify:)
Tel. No. : *
Fax No. :
Email : *
Requirements Details : *