Manufacturers Of.: |
| |
|
» Valves
» Control Valves
» IBR / Non IBR Control Valves
» Flow Control Valves
» Flanged C. S. Safety Valve
» Gun Metal Safety Valve
|
» Steam Trap
» Cast Steel Strainer
» Flow Check Valve
» Pressure Relief Valves
» Safety Valves
» Flow Check Valves
|
|
| |
|
|
|
|
| |
| We Also Provide : |
| |
|
◊ Single & Three Element Drum Level Systems
◊ Orifice Type Flow Meters
◊ M.S. Fabricated T Type Separator & Striners
◊ Condensate Recovery System With Flash Vesel
◊ High Pressure PRDS, C.S. Or A.S. With Combine PRDS Valve
◊ Continuous Blow Down Valva For Heigh Pressure Boilers
◊ Repairs & Servicing Of Existing Control Valves Of Any Make |
|
|
| |
| Products : |
|
Steam Pressure redusing Station (PRS)
Steam Pressure reducing & Desuperheating Station(PRDS) |
|
Three- Way Control Valve |
|
Combined Pressure Reducing
Cum Desuperheating Valve ( Prds Valve) |
|
Pressure Relief Safety Valve |
|
Cast Steel Strainer "Y" Type |
|
Moisture Separator |
|
Cast Steel Y Type Strainer ( Flanged End) |
|
Pressure Relief Cast Steel Safety Valve |
|
Steam Trap |
|
Piston Valve (SW/SCR) |
|
Flow Check Valves |
|
Piston Valve (Flanged End) |
|
Pneumatic Control Valves Pressure Reducing Valves |
|
Condensate Return Pump Systems |
|
Flash Steam Separators |
|
Ball Float Steam Trap |
|
| |
Steam Pressure Reducing Station ( Prs )
Steam Pressure Reducing And Desuperheating Station ( Prds ) |
| |
|
Features: |
We are your single source for stations complete with piping and instrumentation. Our stations are supplied complete and ready to fit on your piping. We have a station to suit every need.
Our steam pressure reducing station are pre-fabricated manufactured ready to install units for steam system management. The pre-assembled steam pressure reducing stations are individually sized to meet end-user's specific needs.lnlet and outlet piping & valve are sized as per best engineering practices. Each unit is custom engineered and designed to meet specific system requirements.
All upstream & down stream pipe work & fittings are adequately sized to ensure that only the required pressure drop occurs across the control valve itself. |
|
|
| |
Combined Pressure Reducing
Cum Desuperheating Valve ( Prds Valve )
|
| |
 |
Our combine PROS valve is a single seated globe type valve that combines pressure & temperature reduction in one compact solution. The high pressure, high temperature steam which enters the main branch, is reduced in pressure and then spray water is injected immediately after pressure reduction. The high velocity and turbulent flow conditions data present immediately following the pressure reduction allow for rapid atomization and absorption of the spray water thus effectively desuperheating. the steam. Reduction of noise level due to mist formation by water is an added advantage. |
|
|
|
|
| |
Cast Steel Strainer " Y " Type
|
| |
|
|
15 NB, 20 NB,25 NB, 40 NB, & 50 NB.
25NB, 40NB, 50NB, ASA1500 Class also available.
|
| |
|
|
|
| |
|
|
Cast Steel Body With SS Screen (40 Mesh ). |
| |
|
|
Screwed BSPT ( Max Working Pressure 35 KgjCm2)
Socket Weldable (Max Working Pressure 45kgjCm2).
Socket Weldable (Max Working Pressure 238kgjCm2).
|
| |
|
Max. Temperature |
427° C. |
|
|
| |
|
|
|
|
| |
Combined Pressure Reducing
Cum Desuperheating Valve ( Prds Valve )
|
| |
 |
Our pressure relief safety valve is designed as a pop up type valve. On exceeding set pressure the valve opens to discharge the excess built up pressure. After relieving excess pressure, the valve automatically returns to the original position. The bronze internals (Seat & Plug) ensure that there is no leakage while in operation. By replacing only the spring it is possible to change set pressure range.
|
|
|
|
| |
| |
|
|
