Diamond Tools, Single Point Diamond Dressers, Multipoint Disc,
Throw Away Diamond Dressers, Honing Stones, Diamond Grit Impregnated Dressers.

Single point "bruted diamond" dressers are made with selected "Congo Rounds" mounted in a matrix. A Single cutting edge is presented to the grinding wheel. Diamonds for single point dressers are selected in accordance with quality and size. The question of using a superior, average or commercial quality, depends on the grinding finish required and the machines and working parameters.

We offer three grades namely A, B & C for all the diamond size, Availability: 0.25 Ct to 5.00 Ct Natural Point Diamonds: The Diamond points are naturally formed. (Not man made like grades A, B, & C) This is a gift of nature. Natural Point Diamond Dressers have high form retention properties. Availability: 0.10 Ct to 2.50 Ct

Multipoint Disc dressers are normally used in small grinding wheels on internal grinding machines. The diamonds are set evenly in rows across the face of the disc. First class needle shape diamonds are used, set in a special sintered bonds. Multipoint disc dresser are perfectly simple to use. Its operation is basically the same as that of a single point diamond dresser except that, after each row of diamonds has been used, new points can be put into operation simply by rotating the disc slightly.

An ample supply of coolant and depth of cut of 0.02 - 0.03 mm. max are prerequisite for long tool life. Multipoint disc dressers can be used at any angle and therefore in any application.

To optimise the life of multipoint disc type dresser, we recommend that the complete disc be turned 180o from time to time to utilise the self sharpening effect produced by wear.

Throw-away Type Diamond Dressers are made of small selected crystal shape or octahedral diamonds, mounted in a matrix. Only one cutting edge is presented to the grinding wheel.
Diamonds for throw-away type diamond dressers are selected for their structural strength, degree of sharpness and lack of deter imental flaws. The proper selection of size and quality appropriate for a given application requires qualified and experienced judgment.
As the name suggests is really a throw - away dresser that means no maintenance, no re-setting of diamond required.
They are used for turing and dressing small and medium sized wheels. For larger wheels with small widths they are used only in profile dressing applications.
These tools are not suited to dress wheels with grit size coarser than 60 mesh.
For your reference we have given few of the standard tools as per European & American specifications, however it can be manufactured as per your specifications.

Profiling and copy dressing of grinding wheels make high demands on profile retention capability and thus on wear - resistance of the diamond tool.
Wherever diamond blade type tools can not meet these requirements due to the specific grinding wheel geometry, precision ground shaping tools are the solution. Shaping tools feature the unique "structure-cut" to ensure optimum tool life. They are manufactured only from the highest grade of natural diamonds and undergo stringent quality control during manufacturing.

Diamond Grit Impregnated Dressers have been developed from multi-point dressers. In contrast to the latter they are manufactured from diamond grit rather than a larger number of small natural diamonds. The advantages of the diamond impregnated dresser lie in its exceptional sharpness, which results from sharp edges and points of the diamond grit.
Diamond grit impregnated dressers are ideally suited to the following applications, dressing resin, vitreous and rubber bond, fine grit and even "grit free" grinding wheels, as well as boron carbide grinding wheels, dressing single profile threaded and V-profile grinding wheels, for general dressing operations on centreless, cylindrical and surface grinding machines.
Diamond grit impregnated dressers are more economical because of their low initial cost and their resistance to shock and impact which prevents shattering.