This type of attritor consists of a jacketed vessel with the inner shell made up of S.S.material and the outer Shell made of M.S.Material.The unit will have a discharge at the bottom. The Base of the shell will be made of S.S.304 plate. The rotating shaft will be made from S.S.material having an appropriate diameter and will also consist of 7 cross bars with welded projections. At the bottom the rotating shaft consists of an impeller. All the contact parts i.e.the rotating shaft, the cross bars, the inner shell and the base of the vessel will be made from S.S.304 material.The drive will consist of a Motor of desired HP coupled to a suitable gear box to give a final output between 100~125 rpm.
DISPERSER
The Disperser range is designed to disperse , mix and homogenise products of different Technologies Differentversions and accessories are available to accommodate thixotropy, aeration requirements etc of the product:
* Automatic speed control system
* Different designs of mixing impellers
* High and Low variable speed
* Process vessels restrining grasps or belt system.
* Rotary process vessels with scraper Blade.
* Vacuum cover.
* Electrical control panel attached either to the
machine or remotely installed.
These machines are available in a wide range and diversity of disperser models drive powers from 10 to 275 HP to fulfil any application involving dispersion of small,medium and larger batches.
SIGMA KNEADER
This machine comprises of a double 'U' shaped container welded and machined together inside which rotates two 'Z' shaped sigma blades in opposite directions. The clearances between the walls and the container are kept to a minimum to ensure maximum effciency in kneading and mixing. The shafts of the sigma blades are fitted in bearing blocks which are each provided with roller bearings, steel glands/teflon rubber seals for smooth and leakless operations. The kneader is mounted on a sturdy base frame fabricated out of ISMC sections and are free from vibrations. For cooling and heating jackets are provided.
These types of machines are available in M.S. And S.S.contruction. The kneader can be tilted by means of a mechanical system or manually and for bigger models beyond 250 Kgs we provided hydraulic tilting.
Hydraulic tilting system is provided with complete power pack, electric motor, pressure valves, pipes, fittings, cylinders and hoses which makes the tilting mechanism quick, easy and simple to operate.
LIQUID FILLING MACHINE
Mustard Oil
Hydraulic Brake Oils
Ground Nut Oil
Lube Oils
Rapseed Oil
Coolants
Soyabead Oil
Oil Paints
Vanaspati Oil
Emulsion Paints
Castor Oil
Varnish
Linseed Oil
Thinners
Non-Edible Oil
Pesticides
Liquid Dyes
Insecticides
Chemicals
Phenyl
Mineral Water
Disinfectants
Shapoo
Squashes
Hair Oil
Liquid Resins
Lotions
Rubber Solutions
Liquid Detergents
Varnishers
Rust Preventors
Fruit Juices
Adhesives
Drugs
Rose Water
Pharmaceuticals
Brandy
Inflammable Liquids
Fruit Pulps
Liquid Inks
Jams
Photographic Chemical
Soups
And all Liquids
Gear Oil
CONTRUCTION :
This type of machine is provided with a stainless steel tank fitted with :
A ) Float controlled supply Valve ,which maintains a constant level to get accurate filling levels.
B ) Fabricated and precisely machined filling valve suitable to different sizes of outlets, depending on the container openings.
C ) Valve lifter
All the parts in contact with the filling material are made of S S 304 material.All other parts except the stand and the weighing mechanism are made of alloy steel and wherever necessary it is hardened and are easily replaceable in case of accidental damage.
FILLING ACCURACY : As the filling is controlled vbu an accurate weighing mechanism which is operated for the gross weight of the container with the liqiud filled stays within the limits of 0.2 % tolerance.