Toroidal Winding Machines

Model : TWM 3/50 MBC

JOB CAPABALITIES

* Coil Dimesions after winding

Minimum ID	MAXIMUM OD	MAXIMUM HEIGHT
50 mm	300 mm	100 mm

BRIEF SPECIFICATIONS
Winding Gauges	: 16 SWG to 26 SWG
Motor	: PMDC 0.5 H.P. / 1500 RPM / 220 Volts.
Power Requirement	: 220 V AC, 50 c/s Single Phase, 2 kW. Approx.
Controller	: Microprocessor Logic Controller.
Pitch Control	: Through Stepper Motor & Controller.
Fill Counter	: 4 - Digit, Preset, LED Display through controller.
Wind Counter	: 4 - Digit, Preset, LED Display through controller.
Speed Control of Main Motor	: Through Thyristor Drive.
Dereeler	: Suitable for the Machine. [ Capacity - 4 Kg. ]
Winding Speed	: Continuously Variable Max. 100 R.P.M.

* Minimum ID and Maximum Height should not occur at a time.

Hot Stacking Machinery

Rotor Winding Machines

Heavy Duty Motor Winding Machines

This is a large sized heavy duty type coil winding machine primarily designed for winding coils of large and medium sized transformers & motors. It can most suitably be used to manufacture long, large and heavy coils. Owing to a tail stock attached, direct winding around the core can be carried out.
There are many models for various transformer capacities and sizes. The most suitable models will be selected at the user's option.
Speed reduction gears or stepless reduction gears and a cone clutch or an electromagnetic clutch are used in this machine, so
that slow starting can be realized. In addition a tall stock can be shifted on the rack.

Manual
* Very Ideal Winding Machine for repair shops/technical institute.
* Can wind both-single and three phase Motor's coil of straight and step windings.
* Useful for 1/8 H.P to 40 H.P Motor coil using six Numbers of Straight and Step Arbours

Manual Motor Winding Machines

Very Ideal Winding Machine for repair shops/technical institute. Can wind both-Single and Three phase Motor's coil of Straight and Step winding.

Useful for 1/8 H.P. to 40 H.P. Motor coil using six Numbers of Straight and Step Arbours.

MANUAL MOTOR WINDING

Medium Duty Motor Winding Machine ( Upto 200 HP )

Model MD-1 , Medium Duty coil winding machine for Motor coils upto about 100 KW Automatic stop at pre-set no. of turns. Speed Reduction gears & an electromagnetic clutches are used.

It can handle winding fixture AJ-1 with concentric Arbour type UW & type U.

Specifications for Medium Motor Winding Machine

* Face Plate Diameter : 400 mm with 4 slots
* Shaft Extension : 250 mm
* 1 H.P. Motor 3 Phase with electro magnetic D.C. Brake with rectifier.
* Five digit mechanical revolution counter.
* Centre Height : 900 mm
* Vertical type carrier with fibre ring tension device.
* Eleven Pairs of Type "H" Arbours / Fixtures.

* Website : www.bmpequip.com , www.coilwindingmachine.in