 |
Gauge Blocks |
• Our KCP class Gauge blocks are made from special grade of Tungsten Carbide / Alloy Steel / Ceramic that gives greater wear resistance, superior finish leading to strong wringability.
|
• Wear Protector and Gauge blocks required for calibration of Micrometer checker are also offered. |
• Along with the standard sizes,Gauge Blocks are also made available in customized sizes. Individual Gauge Block is also available. |
| Type Of Metric Sets |
No. of Gauge Block |
Type of Imperial Sets |
No. of Gauge Block |
| M122/1 |
122 Nos. |
E 81 |
81 Nos. |
| M112/1 |
112 Nos. |
E 41 |
41 Nos. |
| M103/1 |
103 Nos. |
E 36 |
36 Nos. |
| M88/1 |
88 Nos. |
E 9 |
9 Nos. |
| M47/1 |
47 Nos. |
E 2 |
2 Nos. |
| M46/1 |
46 Nos. |
|
|
| M32/1 |
32 Nos. |
|
|
| M9/1 |
9 Nos. |
|
|
| M2/1 |
2 Nos. |
|
|
| M2/2 |
2 Nos. |
|
|
|
| * All Sets from Metric are also offered in 2 mm base size |
| All our Length Standard products nd accessories are delivered in quality wooden casing, appended with; Callibration Certificate traceable to National Standards and Instruction Manual on the use and care. |
| ---------------------------------------------------------------------------------------------------------------------------------------------------- |
 |
Long Series Gauge Block |
• Range available over 100mm to 500 mm in Grade K, Grade 0, Grade 1 & Grade 2 as per ISO 3650/Din 861 Standards. |
• Manufactured from special grade of alloy steel, for greater wear resistance and superior surface finish. |
| • Holes are provided at both ends of Gauge Blocks for combinations with help of Gauge block clamp. |
• gauge blocks are available in standards as well as customized sizes. Along with standard sets, individual Gauge Block is also available. |
| Type of Set |
Sizes in mm |
Qty. |
| M8 |
125, 150, 175, 200, 250, 300, 400 & 500 |
8Nos. |
|
| ---------------------------------------------------------------------------------------------------------------------------------------------------- |
 |
Length Bars |
• Range available from 100 to 500mm in 'Reference Grade','Callibration Grade', 'Inspection Grade' and 'workshop Grade' as per IS: 7014 standard. |
• also available in Grade K, Grade 0, Grade 1 & Grade 2 in line with ISO: 3650/DIN 861 standards.
|
• Bars are offered in 22mm and 12mm diameter from range 25 to 500mm in steps of 25mm. Bars of 12mm dia. can be used as Micrometer setting standards. |
• Manufactured from same special alloy steel used for Gauge Blocks so as to achieve the finest properties.
|
• 'Calibraton Grade', 'Inspection Grade' and 'Workshop Grade' are provided with internal threaded holes to both the ends for combinations with help of studs. |
• 'Reference Grade' length bars are used as a master with plain ends for highest accuracy. |
| ---------------------------------------------------------------------------------------------------------------------------------------------------- |
 |
Gauge Block Accessories |
• These accessories are designed to extend the applications of Gauge Blocks in production & inspection. |
| • In line with IS:4440 standards |
• Enables quick and easy assembly of equipments or Gauges and saves repetitive expenditure on gauges. |
• Ideal for -
> Setting of internal & external measurement of gauges.
> Setting of Bore Gauges
> Height Marketing
> Accurate Graduation etc. |
| • All wearable parts are made of carbide. |
| Description |
7 Pcs. set |
16 Pcs. set |
| Base (Steel) |
01 |
01 |
| Tungsten Carbide Scriber |
01 |
01 |
| Tungsten Carbide Tipped Centre Point |
- |
01 |
| Tungsten Carbide Large Measuring Jaw |
02 |
02 |
| Tungsten Carbide Parallel Measuring Jaw |
- |
01 |
| Tungsten Carbide '2.5 mm' Radius Jaw |
- |
02 |
| Tungsten Carbide '5 mm' Radius Jaw |
- |
02 |
| Tungsten Carbide '6 mm' Radius Jaw |
- |
02 |
| Holder (Steel) '0-50 mm' |
01 |
01 |
| Holder (Steel) '50-100 mm' |
01 |
01 |
| Holder (Steel) '100-200 mm' |
01 |
01 |
| Holder (Steel) '200-300 mm' |
- |
01 |
|
| ---------------------------------------------------------------------------------------------------------------------------------------------------- |
 |
Angle Gauges |
• Angle gauges are used for inspection and calibration of angles, tapers, indexing plates, rotary scale/table, dividing head, Clinometers etc. |
| • Manufactured as per IS: 6231 of 1971. |
• Offered in Standard and Non standard angles. Special angles as per requirement are also provided. |
| • Available in set as well as individual angles. |
| Type of Set |
Sizes |
| Set A (13 Pieces Set) |
1, 3, 9, 27, & 41 Degrees (01 No. each)
1, 3, 9, & 27 Minutes ( 01 No. each)
6, 18 & 30 Seconds ( 01 No. each)
Precision Square Block ( 01 No. ) |
| Set B (15 Pieces Set) |
1, 3, 5, 15, 30 & 45 Degrees (01 No. each)
1, 3, 9, & 27 Minutes ( 01 No. each)
6, 12 & 30 Seconds ( 01 No. each)
Precision Square Block ( 01 No. ) |
| * All Figures in mm |
|
| |
| Inside Dial Calipers | Gauge Blocks / Slip Gauges | Surface & Angle Plates |
| Testing Instruments | Magnetic & Nonmagnetic V Blocks | Torque Wrenches | Pistol Calipers | |
