Planetary Gear Box

Thease drives are working on simple planetary principle.Total load shared by three planet gears therefore torque handling capacity of planetary gearboxes is very high with compared to other type of gearboxes Torque capacity - 40 Nm to 2,50,000 Nm.

Reduction ratio - 3.2 :1 to 10,000 :1
Power rating - 0.18 kw to 100 kw
Mounting - Foot / Flange / Agititor / Special

Geared Motor Flange

Torque Capacity   -   1 Kgm to 6000 Kgm
Reduction Ratio -   3 : 1 to 10000 : 1
Input Power         -   0.25 HP to 50 HP
Mounting              -   Flange / Foot / Agitator.

.................................................................................................................................................................................................................

Electric Winch

These product is supplied with Electric motor. Line pull - 100 kg to 30000 kg Line speed - 1 m/min. To 100 m/min. Rope diameter - 5mm to 30mm drum diameter - 100 mm to 600mm Electric Winches is a Lifting device consisting of a horizontal cylinder turned by a crank on a which a cable or rope winds. Electric Winch is specially designed for application where space is at a premium, these concept and lightweight lifting winches are ideally suited for installation on cranes, davits and derricks. The single drum support enable the rope to leave the drum at a any angle. The heavy-duty planetary drive is partly located within and protected by the drum core. The large drum diameters ensure a healthy drum to cable to diameter ratio and a sufficient working length despite the short drums. We offer to our clients wide range of electric winches to choose from. They work on heat-treated sintered-iron gears for smoother operation.

Technical Features
• Final Drives gears are made with heat-treated carbon steel offering greater strength. .
• Precision needle bearing used in high-load areas offering lower friction level and longer life.
Die formed base helping in quick mounting applications.
• Emergency crank handle.
• Superior stainless steel front plate providing rust resistance.
• High impact case providing weather resistance and protection for internal components.
• Durable hook safety snap keeping the loads attached.
• Available in varied AC and DC models.

Other Information :
• Pay Mode Terms : L/C (Letter of Credit), T/T (Bank Transfer)

5 Ton Electric Winch

Technical Specification: We offer a precision engineered range of Electrical Winch widely catering to the requirements of engineering, automobile, pharmaceuticals, food and chemical industries. These are widely appreciated by our clients for its robust construction, dimensional accuracy and operational efficiency. Our range of electrical winch is available in following specification.

Other Information

Pay Mode Terms: L/C (Letter of Credit)

Worm Gear Boxes / Geared Motors

We offer high quality worm gear boxes and geared motors for uses in various industrial applications such as textile, road construction machinery, chemicals, cement, sugar, plastic, fertilizers, pharmaceuticals and more. Superior in quality, efficiency and performance, our range of worm gear boxes and geared motors are available in various features and specifications such as horizontal, vertical and shaft mounted type.

This product is also known as RIGHT ANGLE DRIVE. This is a product which gives excellent replacement for worm drive.
Torque capacity 40Nm to 2,50,000 Nm
Reduction ratio    -     3.2 :1 to 10,000 :1
Power rating         -      0.18 kw to 100 kw
Mounting               -       Foot / Flange / Special

Foot Mounted Worm Gear Box

Torque Capacity   -   1 Kgm to 6000 Kgm
Reduction Ratio -   3 : 1 to 10000 : 1
Input Power         -   0.25 HP to 50 HP
Mounting              -   Flange / Foot / Agitator.

PMDC Micro Series Geared Motors

Micro Series Geared Motors

Range :-
Power	:	0.05HP to 0.20HP
Speeds	:	20RPM to 200RPM
Voltages	:	12VDC to 180VDC

Industrial PMDC Motors

PMDC (Permanent Magnet Direct Current) Motors are ideally suited for industrial application with high duty cycles.

These DC Motors are offered in standard foot and flange mountings.
Magnetic Motors are extensively required in TENV & TEFC enclosures depending on their applications.

Planetary Gear Box / Geared Motor | Electric Winch | Worm Gear Boxes / Geared Motors |
P. M. D. C. Motors / Geared Motors

Designed & Hosted by : MID Promoted by : GID