|
|
Spring Washers Available in Stock |
| Manufacturers of : |
| |
• Spring Washers
> Wave Spring Washers
> Belleville Spring Washers
> Stainless Steel Spring Washers
• Combi Washers
• Automatic Spring Washers Coiling and Cutting Machine
|
| |
|
| |
|
| |
| |
| Spring Washers |
Spring Washers are widely used in transmission towers erection, Railways, Automobiles and in other engineering applications where locking action is required against rotation of the screw of bolted assemblies.
Spring Washers are made out of best quality spring steel (En-42 Series) according to IS:4072. Washers are produced on automatic machines within close tolerance. Under strict quality control and careful processing, excellent functional properties are obtained. Washers are tested as per IS:3063 and other relevant standards.
Spring Washers are available in the size range from 2.5 mm. to 30 mm. in flat sections and 1/8" to 1 1/2 " in rectangular cross section of wire. The washers can be produced as per the specification given in any other standard against specific requirement.
|
|
|
|
| |
Applications & Use :
The Spring Washers are widely used in Auto Industries, Electrical, Light & Heavy Engineering Industries.
Auto Industries :
Passenger Cars, Trucks, Buses, Tractors, Earth Movers & Earth Moving Equipments, Motorcycles, Mopeds & Automobile Fitments etc.
Electrical / Electronic Industries : Electrical Motors, Pumps, Starters, Switches, Heavy Switchgears, Circuit Breakers, Transformers,
Distribution Boards, Heavy Electricals, Fans, Appliances, Meters,
Transmission Line Equipments, Towers etc.
Heavy Machines : Transport undertaking, Railways, Defence, Textile, Airlines and General Machineries etc. |
|
Technical :
Material : Medium Carbon Steel EN-42 as per IS: 4072
TYPE - A : (with bent / spur ends)
TYPE - B : (with flat ends) as per ISS & BSS, DIN, JIS
FINISH : Natural black, Zinc Plated in Blue, Tellow & Green Finish
STANDARD : IS: 3063, IS : 6735, BS : 1802,DIN- 7980, DIN - 267 Part 26, JIS, MMC
SIZES : M - 2.5 to M - 30 and 1/8" to 1 1/2" in Flat & Square section |
|
|
|
| |
------------------------------------------------------------------------------------------------------------------------------------------------ |
| |
| |
| |
Combi Washers
In the latest assembly technique, bolts with plain washer and spring washer in combination are used to reduce handling and sub assembling time of individual parts.
In these methods bolt is put to threading after inserting spring washer so that it does not come out.
The Internal Diameter is little less than that of prescribed in the standards.
J & J has gained expertise in manufacturing these washers generally referred as "COMBI WASHER".
Special Combi sizes (suitable for bolt put to threading after inserting washer) are also manufactured. |
|
|
|
| |
------------------------------------------------------------------------------------------------------------------------------------------------ |
| |
| |
| |
Automatic Spring Washers Coiling & Cutting Machine
Creating new fundamentals of technology in Indian mechanical tool industry, we also manufacture fully automatic spring washer coiling and cutting machines to manufacture carbon steel and stainless steel spring washers.
These are available in four different models to cover washer sizes from 2.5mm to 36mm. It offers an advantage of very low tooling cost and easy tool change over. More than 70 installation are working successfully all over India. |
|
|
|
| |
| |
|
| |
|
|
|
| |
KHANWALKAR INDUSTRIES
36 - C, Sector - B, Industrial Area,
Sanwer Road,
Indore - 452015
Madhya Pradesh India.
Tel. No. : +91 - 731 - 2721527 / 4046226
Telefax : +91 - 731 - 2721527
Mobile : SUBHASH KHANWALKAR : 9993555087
SANKET KHANWALKAR : 9920907043
Email : 
Website : www.springwashers.net
|
|
|
|
| |
* Indicates Compulsory Fields |
|
|
|
| |
|
|
|
|
