| Product :- |
A) Finned Tubes: |
CONTINUOUS SPRIALCRIMPED FINS
These types of fins are semi-crimped and wrapped
under tension
around the outside of the base tube.
Fins are either tack welded or
brazed to the base
tube at each end of the tube. These finned tubes
can be further HOT DIPPED GALVANISED for
surface protection where as
the deposition of
Zinc also adds up to the efficiency of finned
tubes.
Maximum Operating Temperature-250 0 C:
|
|
| a) Base Tube Diameter |
: |
5/8’’ to 3” (15.8 mm to 76.2 mm) |
| Tube Material |
: |
Carbon Steel / Stainless Steel / Copper / Cupro-Nikel |
| b) Fin Material |
: |
Carbon Steel / Stainless Steel / Copper / Aluminium / Brass |
| Fin Height |
: |
¼’’ to ¾’’ (6.4 mm to 20 mm) |
| Fin Pitch |
: |
3fins/inch to 11 fins/ inch (118 fins/meter to 433
fins/meter) |
| Application |
| Commercial Application for Air Heating OR Air Cooling up to
1300 C to 1500 C using Steam / Thermic Fluid / Hot Water as Heating Media
OR Water as Cooling Media |
|
| CONTIONUOUS SPIRAL ‘G’ TYPE FINS |
The
strip is tension wound into a machined groove over
the base tube
material. This ensures maximum heat
transfer at high temperature.
Maximum operating Temperature-450 0 C:
| a) Fin Material |
:
|
Aluminum
/ Carbon Steel |
| Fin Height |
: |
1/2’’
to 5/8’’ (12.7 mm to 15.87 mm) |
| Fin Pitch |
|
8fins/inch to 11 fins/ inch (316 fins/meter to 433 fins/meter) |
|
|
| b) Base Tube Diameter |
:
|
3/4’’ to 2” (19.05 mm to 50.8 mm) |
| Tube Material |
:
|
Carbon Steel / Stainless Steel |
Application |
| More
specifically used in Air Cooled Exchangers OR Condensors |
| |
|
| B) FINNED TUBE
TYPE HEAT EXCHANGERS : |
STEAM /THERMIC FLUID HEATED AIR HEATERS
Equipments used for heating Air by using Steam Or Thermic Fluid
as the heating medium. Finned tubes are used as the heat
transferring media to the air. Many combinations of finned tubes can
be used as per the requirement, depending on temperature and
application. Equipments are sized as per the Air Volume to be heated
mainly the material of construction are Mild Steel and Stainless
Steel. |
|
| Application |
| Used for Air Heating in
commercial applications and Pharma Equipments like – Fluid Bed
Dryers, Tray Dryers, Spray Flash Dryers etc. |
|
| MULTIPLE CELL HEAT EXCHANGERS |
These Heat Exchangers are also used for Heating Air
using Steam as the heating medium. These are
specifically designed to handle large Air Volume and for
achieving temperature of Air beyond 1500 C. We can also
design Heat Exchangers for air temperatures up to 220 0 C. We have facility to manufacture Heat Exchangers with
a cross section size of around 7000mm (L) x 4000mm (W)
in all material combinations. |
|
| Application |
| Used for Air Heating in
Process houses for drying food products where temperature
requirement is above 1250 C. Also used as Air Pre-Heaters in
Boilers to get air temperature up to 2000 C. |
| |
|
|
