 |
| |
Asbestos Fibre Jointing Sheets, Non Asbestos Fibre Jointing Sheets, Rubber Sheets, Graphite Products, Mumbai, India |
| |
PTFE Thread seal Tape |
| |
"Plumb
Pack" Brand PTFE Thread seal Tape is an
ideal seal material. The PTFE Threaded Tape are
manufactured according to
International Standards
& Specifications. All the manufacturing
processes are
controlled as per the ISO 9001:2000 Quality
Control Systems. The "Plumb Pack"
Tm Brand
PTFE tapes are
confirmed to American UL and Japanese JIS
standard.
The technical details of the "Plumb Pack" tape are
as below :
Salient Features :
*
Low
Coefficient of Friction
*
Excellent Chemical & Corrosion
Resistance
*
Non
Surface Sticking, Non Contaminating, Non Hardening
*
Wide Working Temperature Range - 190C to +370 C
*
High Pressure Resistance - 150 - 200 Kg/Sq Cm
*
Tensile Strength > *N/sq mm
*
Ultimate Elongation > 25%
Specifications :
| |
Sizes |
Tolerance |
|
Width |
12.5mm |
19 mm |
25mm |
+ 0.5
mm |
|
Length |
12 mts |
12 mts |
12 mts |
+ 0.5
mt |
|
Thickness |
0.1 mm |
0.1 mm |
0.1 mm |
+ 0.01
mm |
|
Apparent
Density |
0.5 gm/cc |
0.5 gm/cc |
0.5 gm/cc |
|
|
Packing
:
Shipping Carton - 10 x 100 Pcs
Competitive Advantage :
* Assured Quality confirming to UL &
JIS International Standards
* Competitive Prices
* Prompt & Reliable Service |
PTFE
THREAD SEAL |
PTFE Thread Sealant
Tape, due to the special nature of the thread
seal
will be lasting and resistant to
high temperatures and corrosive chemicals. The seal
will not harden or become brittle but will remain
flexible enough when the seal is opened for
maintenance.
PTFE Thread Seal abt Tape can be used for various
media from corrosive chemicals to water and gas to
oil, in hydraulics and pneumatics.
|
Instructions for Proper Usage
Wind the tape by hand, using a constant minimal
tension
sufficient for the tape to take up the form of the
thread.
The tape should be wound in a helical fashion with a
50%
overlap (as shown in diagram) in the direction of
the thread so that when the connection is completed
the
finishing end of the tape remains in position. The
tape width should not exceed the length of the
thread form. |
|
Back
|
Next |
|
|
|
