01) |
Modular welded structure in 1.5/2.00 thk folded CRCA sheet with vertical and horizontal (depth wise) indexing holes dia 9 & dia 4.2 in 12.5mm pitch. |
02) |
Base in 3.00 thk folded sheet with removable front and rear covers in 2.00 thk. Base cover can be slotted for ventilation from bottom (if required). |
03)
|
Front & rear single door / split doors / partial doors in 2.00 thk CRCA sheet. With support channels, sheet metal special hinges, 3/4 point handle lock. |
04) |
Instead of door (when door is not necessary at rear) screwed cover in 1.5 thk. |
05) |
Bottom gland plates in parts combination in 2.00 thk folded CRCA sheet. Slotted or perforated bottom covers in 1.5 thk for ventilation from bottom (if required). |
06) |
As it is closed sides design, sides are not removable here. |
07) |
Top cover is also not removable in this design, cutout with removable plate can be provided for cable entry from top or ventilation purpose. |
08) |
Component mounting plate in 2.00/3.00 as per requirement.
- Size (Width -100) x (Height - 100) with depth wise adjustable mounting in 25 pitch.
- Partial component mounting plates in any size within maximum size range. |
09) |
These types of enclosures are not suitable to join together, however we can join them, required. |
10) |
As side walls are not removable, inter panel seperator is not required here. |
11) |
Lifting eye bolts for normal weight and heavy duty angles for bigger enclosures. |
12) |
Polyethylene gasket on door and polyurethane foam on covers, both are fire retardant. |
13) |
DIN standard 19” equipments mounting arrangement is possible. |
14) |
Swing frames suitable for 19” mounting in width and height as per requirement. |
