Public Address System |
|
It is a centralized amplifier based system that’s been designed to provide voice paging and to broadcast alarm tone during emergencies.
The system can transmit alarm tone and routine voice messages, from a central location, to all or selected areas of the facility, in a reliable and safe manner, by the use of loudspeakers.
The entire operational area / facility can be divided into one or more zones, which can be accessed independently either for announcements or for alarm broadcasting. The loudspeakers are installed in these zones.
There are no limitations to number of zones in the system or number of loudspeakers in each zone. Each loudspeaker is connected to the central equipment for amplification and other control functions.
Depending on the surrounding environment, either flameproof loudspeakers (for hazardous atmospheres) or weatherproof loudspeakers (for safe & non-hazardous atmospheres) or indoor loudspeakers (for indoor areas) are installed in each zone. The loudspeakers are available in different wattage, sizes, types and constructions.
The system is designed to offer clear reproduction of sound and intelligibility of speech even in high noisy areas.
Multiple control desks can be installed in the same system, for paging access (with priority) from more locations.
The system uses high reliability amplifiers with built in over load protection circuitry, short circuit protection, open circuit protection and thermal protection.
|
|
|
|
Key Advantages : |
• |
Reduced and easy maintenance |
• |
Simple, reduced and economical field cabling |
• |
Trouble free system |
• |
Flexibility to connect the loudspeakers at longer distance. |
• |
Modular architecture |
• |
Flexibility to build the system for the present need with enough provision for future expansion. |
• |
Connectivity of p. a. system with the EPABX System |
• |
Monitoring the healthiness of all associated equipment in the PA System |
• |
Call attention chime tome prior to all announcements |
|
|
|
|
Plant Communication System |
|
PLANT COMMUNICATION SYSTEM (PCS) is a microprocessor controlled, software programmable, central exchange based “paging system with talk back facility”.
The system comprises of page channel and party channels for two-way communication facility between the control room and the field.
Page Channel provides loud speaking facility and is used for broadcasting messages or issue instructions or to locate field operators in the plant. The announcements made by the users are heard over the field loudspeakers.
|
|
Party Channel is used for carrying prolonged conversations in private mode, which is not heard over the loudspeakers. The system possess multiple party channels i.e. one dedicated channel for each field handset station. Thus each field operator can carry his separate, independent and simultaneous conversation.
The field call stations and loudspeakers are installed at various locations throughout the facility. The person can communicate from any field call station of the system.
The loudspeakers and field call stations are indoor type for indoor areas, weatherproof type for outdoor safe (i.e. non-hazardous) areas and explosion proof type for hazardous areas. The loudspeakers are available in different wattages & sound pressure levels and in different sizes & constructions to meet all types of the requirements.
The system provides excellent reproduction of sound, clear audible announcements and high intelligibility of speech, even in high noisy areas. |
|
|
|
Key Features:
• Paging + Alarm broadcasting facility
• Master-Slave Configuration with facility to connect multiple master control desks
• Direct Communication between the field operators and the control room operator
• Direct communication between the two field operators (i.e. without routing any calls through central control room)
• Communication between the two field operators with the help of Master Control Station (MCS)
• Individual zone, Multiple zone and All zone selection for announcements
• Facility of connecting emergency siren over the paging channel
• Digital display at MCS for identification of field call station number / area name
• Call holding, call waiting, page priority, override and central monitoring facility at MCS
|
|
|
• No requirement of AC mains for operating any field equipment
• Access to features can be restricted (by software programming) for few call stations
• No correlation between the field handset stations and the loudspeakers. Their quantity, location and their functioning are 100% independent
• Open system to facilitate its integration with EPABX, Fire alarm etc.
• Easy and quickly expandable by adding the relevant card in central equipment
• Host of various unique and useful features |
Key Advantages:
• State of the art technology
• Software programmable for communication options, features and system access
• Simple and economical field cabling
• Cost effective design and hardware
• Trouble free system
• Modular architecture, offering the flexibility to build the system block by block
• Centralized monitoring for system operation, performance and equipment healthiness
• Reduced and easy maintenance
• High flexibility and adaptability
• 100% non-blocking communication facility to all users
• Minimum downtime, easy system operation and maximum safety
• Easy and Quick to expand
|
|
For more information and product catalogue please write to us. |
|
|
Flameproof Explosion Proof Telephone |
|
Explosionproof Telephone is designed for voice communication in the hostile environment where reliability, efficiency and safety are of prime importance.
The phone is suitable for use in harsh and hostile environment characterized by:
• Indoor & outdoor usage
• Presence of dust & water ingress
• Corrosive atmosphere
• Explosive gases & particles
• Extreme & varying temperature
• Loud ambient noise due to industrial processes
• Pilferage, Mishandling, rough usage, safety |
|
|
|
|
|
Key Features: |
• |
Certified for use in Gas Group I, IIA and IIB |
• |
Zone classification: Zone 1 & Zone 2 |
• |
Ex ‘d’ protected |
• |
Intrinsically safe Ex "ib" protected / certified. |
• |
Temperature classification: T6 |
• |
Degree of Protection: IP 66 |
• |
Robust and weather resistant |
• |
Mounting: Wall / column / structural |
• |
Enclosure Material: Aluminum |
• |
Handset material: ABS |
• |
Power Supply: Line powered i.e. drawn from telephone line. It doesn’t require any external AC Supply. |
• |
Built in External Ringer, which provides significant and penetrating calling signal
(>85dbA @ 1 meter). The sound output is sharp and thus easily gets differentiated
from the surrounding noise. |
• |
Large and visible, push button type keypad for smoother and faster dialing of numbers.
The dial system is integrated inside the telephone body so that neither dust can get in nor it can get damaged |
• |
The Push Button Keypad is protected with silicon rubber cover pad |
• |
No. of keys: 0 to 9, * , #, Flash, Redial, Reset, Blank (Total 16 keys) |
• |
Hook Switch Mechanism: Magnetically operated reed switch, encapsulated in FRP cradle
for signaling operation |
• |
No mechanical or moving parts. Elimination of moving parts ensures more level of reliability to phone |
• |
Noise canceling dynamic microphone for effective communication from noisy areas |
• |
Handset cord: Stainless Steel spiral cord |
• |
Dialing system: LD and DTMF (swithcable) |
• |
Light weight and compact design to ensure fast and simple installations |
• |
Compatibility: Fully compatible with all PBX’s |
• |
External Canopy in FIBRE for extra protection |
• |
Mounting Brackets for mounting on structure |
• |
Cabling: Single pair telephone cable |
• |
Dimension of the phone: Approx. 356 X 200 X 205mm (H X W X D) |
• |
Weight of the phone: Approx. 12 Kg. |
• |
Certified by: CMRI, INDIA |
|
|
|
Weatherproof Telephone |
|
Weatherproof Telephone is designed for voice communication in the hostile environment where reliability, efficiency and safety are of prime importance.
The phone is suitable for use in harsh and hostile environment characterized by:
• Indoor & outdoor usage
• Presence of dust & water ingress
• Corrosive atmosphere
• Extreme & varying temperature
• Loud ambient noise due to industrial processes
• Pilferage
• Mishandling, rough usage & safety |
|
|
|
|
|
Key Features: |
• |
IP 66 protected |
• |
Suitable for indoor / outdoor, safe and Non – hazardous areas of the plant. |
• |
Robust and Weather Resistant |
• |
Mounting: Wall / Column / Structure Mounting |
• |
Enclosure: Aluminum alloy (LM6) |
• |
Handset material: ABS |
• |
Keypad: Push button Keypad, in ABS, with external Silicon Rubber Cover |
• |
No. of keys: 0 to 9, * , #, Flash, Redial, Reset, Blank (Total 16 keys) |
• |
Power Supply: Drawn from telephone line. It doesn’t require any external AC Supply. |
• |
Built in External Ringer, which provides significant and penetrating calling signal. The sound output is sharp and gets easily differentiated from the surrounding noise, in average noisy area |
• |
Large and visible, push button type keypad for smoother and faster dialing of numbers. The dial system is integrated inside the telephone body so that neither dust can get in nor it can get damaged |
• |
Hook Switch: The magnetically operated reed switch, encapsulated in FRP cradle for signaling operation |
• |
Handset cord: Stainless Steel spiral cord |
• |
Noise canceling dynamic microphone for effective communication from noisy areas |
• |
No mechanical or moving parts. Elimination of moving parts delivers new levels of reliability to phone |
• |
Switchable for Pulse and Tone dialing. Loop Disconnect (LD) and Tone dialing (DTMF) are
internally selectable |
• |
Compatible for interconnection with external ringer, flasher, hooter etc. |
• |
Light weight and compact design to ensure fast and simple installations |
• |
Compatibility: Fully compatible with all PBX’s |
• |
External Canopy in FIBRE (Optional Item) |
• |
Mounting Brackets for mounting on structure |
• |
Cabling: Single pair telephone cable |
• |
Dimension of the phone: 239 X 178 X 175mm (H X W X D) Approx. |
• |
Dimension of the canopy: 331 x 349 x 228 mm (H X W X D) Approx. |
|
|
|
Integrated PA and Intercom System |
|
It comprises of integration of plant telephone system with PA system.
The telephone system provides voice communications between offices & operational buildings of the plant through intercoms and provides access to outside trunk lines.
PA system provides transmission of routine voice messages over loudspeakers, to all or selected areas of the plant, in a reliable, safe and efficient manner.
On integration of the two, the PABX user gets access to the PA system where by they can announce over the loudspeakers from their telephones. The telephone user can announce in individual zone OR in multiple zones OR in all zones. |
|
All other features as mentioned under PA system shall be available in this system too. |
|
|
Integrated Industrial Communication System |
|
In a modern plant, a multiplicity of different types of communication systems is encountered e.g. Intercom System, EPABX System, Public Address System, Security System, Radio Communications, Radio Paging, Data communication networks, Fire alarm system etc.
Often such systems are deployed in stand-alone manner and can not be integrated,
which leads to:
• Sub optimal usage (limited use)
• Increased hardware & maintenance
• Multiple user instrument at a common location
• Inflexibility for expansion
• Inflexibility to cope with changing configuration, needs and industrial dynamics
|
|
TELE-NET has the expertise and capability to design, build, install, commission and maintain the integrated communication systems. |
Integrated Industrial Plant Communication (IIPC) is designed to offer the following : |
• Expanding architecture
• Custom configured
• Integrated system to meet the requirement of intercom, EPABX, hotline, PA System, Paging / loud speaking
• Multiple page / party communication channels
• Point to point or Point to Multi point and Master / Slave configuration
• Multi point, multiple control desks for a large integrated plant
• Interface to P&T, Radio lines, Data networks etc.
• State of the art and futuristic technology – Fully Digital PCM / TDM
• Transparent Networking |
|
|
|