|
|
Domestic Reverse Osmosis Plant
Domestic Reverse Osmosis is easy to
service, easy to install, safe and easy to use, mineral
water at nominal price. With our wide range of the
expertise and experience in the treating water in
industrial and commercial segment, we step into the
Domestic Market with the Best Unit to give the Purest
Form of Water using the multiple filtration and the
state of the art technology of Reverse Osmosis, the
process used for making Packaged Drinking Water &
Mineral Water. Reverse Osmosis, the membrane technology
removes the most of the dissolved impurities, organic
impurities, toxic and heavy metal ions, bacteria and
virus. |
|
DM Plant |
Deionizers Plants are available in a
wide range with maximum flow rates from 10 Ltrs/hr to
250000 Ltrs/h in standard plants. Two Bed DM Plant
comprise of two mild steel rubber-lined /FRP pressure
vessels filled with strong acidic cation exchange resin
and strongly basic anion exchange resin. They are
available in a range of diameters. The modular
construction permits flexibility in the selection of
cation and anion units to cater to different types of
raw water. Degasser modules for the range Of CA units
are also available. These are useful for raw waters
containing a significant amount of alkalinity. Treated
water of conductivity less than 10 microsiemence/cm with
ph of 7.5 to 8.5 is achieved at Two Bed DM Plant outlet
.
Mix Bed DM Plant comprise of one Mild steel
rubber-lined/FRP pressure vessels filled with strong
acidic captions exchange resin and strongly basic anion
exchange resin in mixed form. They are available in a
range of diameters. Mix Bed DM Plant is usually used as
polishing unit at outlet of Two Bed DM Plant/RO Plant.
The modular construction permits flexibility in the
selection of cation and anion units to cater to
different types of raw water. Treated water of
conductivity less than 1 microsiemence/cm with ph of 6.5
to 7.5 is achieved at Mix Bed DM Plant outlet.
|
Swimming Pool Filtration Plants
A properly maintained pool is one
that is visually and biologically cleans. If the
chlorine and pH levels are maintained, bacteria and
algae will be killed and the pool will be biologically
safe. Filtration is mechanical process of removing
insoluble matter from swimming pool water. Pool water
carrying particulate matter, solids and debris is passed
through filtering media that allow clear water to return
to the pool. Water clarity is important for appearance,
hygiene and safety.
|
Sewage Water Treatment Plants
Water Enviro Engineers offers
complete solution for Sewage Water Treatment Plants and
Recycle. The Sewage from the residential and commercial
buildings is treated for reduction in BOD, COD & TSS in
order to comply with the pollution control board
standards for disposal, gardening, flushing and other
non-potable purposes.
The sewage treatment plants are based on the Latest e
ionization technology followed by a Lamella Plate
settler. System requires no chemical for flocculation
and coagulation. TSS is removed by Activated Carbon
Filter for removal of organics. The filtered water from
ACF is then chlorinated & stored in the treated water
tank.
These sewage treatment plants are available in fully FRP
material designs for commercial and residential
buildings as well as skid mounted for easy installation
and commissioning.
Rain Water Harvesting
It means capturing rain where it
falls or capturing the run off in your own village or
town. And taking measures to keep that water clean by
not allowing polluting activities to take place in the
catchment.
Therefore, water harvesting can be undertaken through a
variety of ways
• Capturing runoff from rooftops
• Capturing runoff from local catchments
• Capturing seasonal floodwaters from local streams
• Conserving water through watershed management
It means capturing rain where it
falls or capturing the run off in your own village or
town. And taking measures to keep that water clean by
not allowing polluting activities to take place in the
catchment.
In general, water harvesting is the activity of direct
collection of rainwater. The rainwater collected can be
stored for direct use or can be recharged into the
groundwater. Rain is the first form of water that we
know in the hydrological cycle, hence is a primary
source of water for us. Rivers, lakes and groundwater
are all secondary sources of water. In present times, we
depend entirely on such secondary sources of water. In
the process, it is forgotten that rain is the ultimate
source that feeds all these secondary sources and remain
ignorant of its value. |
|
Contact Information
|
Designed & Hosted by : MID
Promoted
by : GID |
|