| |
|
| Home | Profile | Scientific & Laboratory Equipments | Contact Us | Feedback |
Water Still Wall Mounting, Rectangular Hot Plates, Lab Oven, Hot Air Oven, Bod Incubator
|
Water Still / Wall Mounting |
| |
• The unit is recommended for making pyrogen free distilled water of a very high degree of purity.
• Made out of S.S. special kettle element is fitted with Ejection Device/Auto Cut for safety of the element in case water supply is stopped.
• The cock fitted to the unit is of brass C.P. A wall mounting clamp is provided with the unit but without rubber tubing.
• Supplied with cord and plug to work on 220/230 volts A.C. |
|
|
| ---------------------------------------------------------------------------------------------------------- |
---------------------------------------- |
Rectangular Hot Plates |
| Rectangular, body made of mild steel powder coated and top plate made of cast iron. Temp. upto 350°C Fitted with Energy Regulator OR Thermostatic Control |
| |
|
|
| ---------------------------------------------------------------------------------------------------------- |
---------------------------------------- |
Lab Oven |
Introduction :
"AVI" made Laboratory Ovens are designed and fabricated to suit various I.S. & A.S.T.M. standards application in the growing field of Medical, Agricultural, Industrial, Research laboratories & Hospitals. |
| |
Features :
a) Temperature up to 250 oC.
b) Digital temperature controller with an accuracy of +/-1 oC. |
|
|
|
| ---------------------------------------------------------------------------------------------------------- |
---------------------------------------- |
Hot Air Oven |
Double Walled Construction inner chamber made of mild Steel/St. Steel/ and exterior G.I sheets Powder coated. The gap between the two walls filled with glasswool insulation.
Temperature controlled by thermostat.Supplied with G.I. wiremesh shelves. |
| Temperature Range : 50oC to 250oC accuracy ±2oC |
|
|
|
| ---------------------------------------------------------------------------------------------------------- |
---------------------------------------- |
B.O.D Incubator Standard & GMP Model |
| Salient Features: |
| • Double walled cabinet insulated with 75mm thick super fine mineral wall. |
| • Outside-epoxy powder coated MS sheet. |
| • Inside chamber-anodized aluminium. |
| • Three adjustable anodized shelves (perforated) |
| • Temperature controlled by imported double action hydraulic type thermostat-5oC to 50oC ±1oC sensitivity. |
| • Evaporator coil, sealed heating and thermostat sensing element are in the airrr duct at the back. |
| • F.H. Motor's two fans for inside air circulation. |
|
|
|
|
| -------------------------------------------------------------------------------------------------------------------------------------------------- |
|
* Indicates Compulsory Fields |
|
|
| | | | |
|
|
