Electroless Nickel Plating
Electroless Nickel Plating
Electroless Nickel Plating
Electroless Nickel Plating
Our Company and its activities :
Chetana Capacitor is a job shop where we do Electroless Nickel Plating on customer parts / equipment. We are the pioneers in this field and besides being the most experienced, have one of the largest plating facilities in India.
About our facility
We are a quality process house for Electroless Nickel Plating.
• With technical know how from Elnico.
• One of the largest process house in India.
• Can handle jobs up to 1500 mm in length and up to 1.5 Tons by weight.
• Thickness testing instrument.
• Can check various other qualities of the deposit such as bonding, porosity, nitric acid test etc.
Features at a Glance :
• Totally uniform plating thickness on the entire part without any limitations of complexity of the    component
• Plating thickness can be controlled in micron tolerances.
• Grinding after plating is not required because of it’s uniformity in the deposit.
• Can be done on practically all metals.
Advantages at a Glance :
• Superior corrosion protection
• High Surface Hardness
• Excellent wear resistance
• Non sticking – Self polishing surface
• Consistency in deposit characteristics.
Electroless nickel plating is an alloy of nickel and phosphorous.
There are three types of Electroless Nickel Coatings available depending on the phosphorous content in the deposit namely…
• Low Phosphorous Electroless Nickel
• Medium Phosphorous Electroless Nickel
• High Phosphorous Electroless Nickel
Technical Information on Electroless Nickel Plating
Our plating - called 'Pepcoat' and technically known as Electroless Nickel - is an unusual plating because it does no require electrical current for deposition. Hence it does not have the handicaps of conventional Electroplating, and offers the following advantages:

• Totally uniform plating thickness on the entire part
• Plating thickness that can be controlled in micron tolerances
• Grinding after plating not required because of uniform plating thickness
• Plating can be done on any metal
• HCHCr S.S. Gun metal, Copper, Brass etc.
PEPCOAT has a unique combination of engineering properties and is widely used for :

• Superior corrosion protection
• High surface hardness - 48 HRC to 62 HRC
• Excellent wear resistance - reduces friction
• Non - sticking, self - polishing surface
• Stability
Typical parts routinely plated with PEPCOAT are :

• Plastic Moulds, Extruder Screw, Spider spiral, Die/Punch
• Valves - Ball, Butterfly, Gate Valve seats, Pumps - Impellers, castings, and shaft,    bushes
• Hydraulic and Pneumatic cylinder, Piston rods, Pharma and Food Machinery
• Textile parts - Thread rollers, Thread guides
• Complicated parts that cannot be electroplated
• Mismachined and worm parts for all salvage
Designed by : MID   Hosted by : GID   Promoted by : PBD