Stability Chamber, Walk in Stability Chamber, Automatic Bomb Calometer, Vertical Autoclave
 

Stability Chamber


Stability Chamber
For Conditions As Per ICH Guidelines :
Temperature range: 10.0°C to 60.0°C. Accuracy / Uniformity: ±0.1 °C/± 1°C
Humidity range: 25% to 98% RH. Accuracy/ Uniformity ±2%RH/±3%RH
Temperature /Humidity display: Digital Big LCD Display and Digital LED Display forsafety controller.
Control: Microprocessor based PID Auto tune control. With Digital safety controller
Resolution: 0.1°C/1%RH
Temperature sensor: Rutronic make (Imported).
RH sensor: Rutronic make (Imported).
Heating: 'U' shaped Nichrome wire heater in SS sheathing.
Cooling: CFC free Copeland make compressor utilizing R 134 eco friendly refrigerant,with condenser, motor and relay.
Steam injection: Boiler with reservoir made of thick stainless steel, with heater, water inlet control, low water level safeguard.
Air circulation: Flange motor with impeller / blower.
Construction: Double wall, with puf insulation, outer door key lockable, inner glass viewing door.
Chamber illumination: Fluorescent light with touch keys.
----------------------------------------------------------------------------------------------------------------------------------------

Walk-in Stability Chamber

Walk-in Stability Chamber
Temperature Range : 20°C to 60°C
Accuracy : ± 0.2°C
Humidity Range : 40% RH to 95% RH
Accuracy : ±2% RH
Temperature Uniformity : ±1°C
Humidity Uniformity : ± 3% RH
 
Temperature & Humidity Suitable for 25 °C& 60% RH, 40 °C & 75% RH, 30 °C & 65% RH .
Specially designed chambers to carry out stability studies at low humidity conditions such as 25°C & 40% RH, 40°C & 25% RH NMT, 30°C & 35% RH.
----------------------------------------------------------------------------------------------------------------------------------------

Walk-in Cooling Chamber

Walk-in Cooling Chamber
 Temperature Range : 2°C to 8°C
 Accuracy : ± 0.5°C
 Temperature Uniformity : ±1.0°C
 
Exterior made of Mild Steel Powder Coated and Interior made of Stainless Steel 304.
Exterior made of Stainless Steel 304 and Interior made of Stainless Steel 316(S).
----------------------------------------------------------------------------------------------------------------------------------------

Water Distillation

Water Distillation
Design
Specially design environment friendly for water distillation of lab. This distillation unit require only power and inlet water for boiler for 5 liter per hour.
100% output water
No wastage drain water
No extra power.
 
 
 
Designed & Hosted by : MID Promoted by : GID