 |
Card Racks, Accessories, Floor Standing Racks, Racks, Instrument Racks, Soft Line Floor Standing Racks, Ruggedised Racks, Wall Mount Racks, EMI Protected Racks, RFI Protected Racks
|
| |
Card Rack
|
PT 20 SERIES
|
Card Racks form the basic building
blocks of Instrumentation Systems and used for Functional sub assemblies
such as power supplies, amplifiers, converters, detectors, signal conditioners
and modems.
FEATURES:
• Simple assembly requiring only a screw Driver
• PCB guides easy to fit, simple snap on type with
good amount of rigidity and pass through 2g vibration test can take
1.6 mm to 2.4 mm thick PCBs.
• These racks available from 2 U to 9 U
• Specially designed rack compatible for CPCI mother
boards (in which case PCBs can be plugged in on mother boards from both
sides ) and VME 64x mother board
• These racks can be made EMI / RFI protected.
MATERIAL AND FINISH:
• Sections made of Aluminium with white anodizing
• Guide Rails: Made of plastic
SCOPE OF SUPPLY:
• Side Angles 2 Nos.
• Side Plates 2 Nos.
• Horizontal Sections with Guide Rails to mount PCB
guides-4 Nos.
STANDARD SIZES:
Card Racks Suitable for
- PCB Depth: 80, 100, 160, 220, 280 mm
Overall Depth of Card Rack: 140, 200, 260, 320, 380 mm
Height |
Suitable for PCBs hts (mm) |
2 U* |
88.1 mm |
55.5 |
3 U |
132.5 mm |
100 |
4 U |
177.0 mm |
144.5 |
5 U |
221.5 mm |
188.9 |
6 U |
265.9 mm |
233.4 |
-
Maximum Usable Width: 84 T * Overall Width 19"
* 1 U = 44.45 mm and 1 T = 5.08 mm
OPTIONAL ACCESSORIES
# Card Guide
# Facia Panel
# Handles For Facia
# PCB Guides
# PCB Holder
# Pull-Out Handles
# Threaded Strip
# Top / Bottom Cover
# Euro Rail
# Carrying Handles
# Front And Rear Panels
|
|
COMBINATION CARD RACK: The card frame is divided into
3U and 6U compartments |
|
COMBINATION CARD RACK: The
card frame is divided into 3U and 6U compartments |
PT 21 SERIES |
Card Racks - Ruggedised Version - With Stain steel Steel Pcb Guides Suitable For 80G Shock Test |
| PT
22 SERIES |
Card Racks - Ruggedised Version - With Aluminum Milled Guide Plate |
| PT
23 SERIES |
Card Racks - Vme Rack - Industrial Version |
| PT
24 SERIES |
Card Racks - Vme Rack - Ruggedised Version |
| PT
25 SERIES |
Card Racks - Cpci Rack - Industrial Version |
| PT
26 SERIES |
Card Racks - Cpci Rack - Ruggedised Version |
|
|
| |
|
| PT
30 SERIES |
Instrument Racks are basically designed for Bench Top Equipments
Features
# Structure is built with special grade Aluminium extrusions
# High Quality natural anodized finish
# Tilting handle provision to suit desired angle
# All the parts are die fabricated to ensure precision
# Uniform ample radius at four corners to keep you unhurt
Scope of Supply
# Basic Rack with Top / bottom covers and resting legs
# Front cover screw less type, rear cover screw on type
Material and Finish
# Extruded frame, front cover and top bottom covers in aluminium
and powder coated
Optional
Accessories
• Carrying handles
• MS or Aluminium chassis
• Sub racks, Card Racks, Cooling fans
• Customised Front Overlay |
|
|
PT
32 SERIES |
PT-33 Series Soft Line Instrument cases well suited for Test
Jigs Medical Instruments
Features
Structure is built with special grade Aluminium extrusions
Uniform ample radius at four corners to keep you unhurt
• Tilting handle provision to suit desired angle
• Front cover tamper free/screw less
Scope of Supply
• Basic Rack with Top / bottom covers and resting legs
• Front cover screw less type, rear cover screw on type
Material and Finish
• Extruded frame, front cover and top bottom covers in aluminium
and powder coated
• Rear Cover MS black Powder coated
Optional Accessories
• Tilting and Carrying handles only for 3U and 4U
• MS or Aluminium chassis
• Sub racks, Card Racks, Cooling fans
• Customised Front Overlays
|
|
PT 33 SERIES
|
INSTRUMENT
RACKS - TABLE TOP
|
|
| |
|
|
|
|
|
