We are Manufacturers of Permanent Magnetic Lifters, Precision, Magnetic Toolsand our setup is situated at Pune - Satara Road, Pune, ( Maharashtra, India )
Magnetic V Blocks |
|
 |
These Magnetic –Vee blocks are invaluable and versatile in tool – making and inspection, in quality control and tool – room. Due to their extremely high magnetic power they can be used for drilling and grinding (both wet and dry) and even for light milling work. The - Blocks have a total of three magnetic surfaces. Top and bottom each with 90- degree v – angle and end surface opposite from switch. All three magnetic surfaces as well as the two sides are carefully ground. Their accuracy for flatness, parallelism and square ness is within 0.005 mm or 0.0002 inches for all work, which requires accurate positioning. |
 |
|
V - Block Hardened (With Clamp) |
|
 |
The V – Blocks have two V – angles of different size to take parts of varying dimensions. By means of the clamp the Work can be held tight in the block. The accuracy of the vee block/100mm is within 0.005 mm. |
|
|
Permanent Magnetic Chucks |
|
 |
This permanent magnetic chuck guarantees outstanding performance and
reliability. The rigid assembly of these chucks result in accurate grinding and
milling. The selected pole spacing ensures the maximum possible grip on a wide section of work-pieces. Using an additional top plate can accommodate all types, sizes and shapes of work-pieces. The magnet used is ‘NdFeB’. This magnet is very powerful than ‘AlNiCo’ magnet. |
|
|
Magnetic Base |
|
 |
A powerful permanent magnetic type base holds firmly to any steel or iron surface, horizontally, vertically or up side down, this eliminating time spent on clamping indicator to machine. When magnet is turned ‘ON ‘ by the lever, the base and two sides are energized for attachment on flat surfaces and a ‘ V ‘ slot facilitates gripping of the cylindrical shafts. |
|
|