WATER DISTRIBUTION SYSTEMS

Purified Water / Water for Injection

Storage tanks are included in water distribution systems to optimize processing equipment capacity. Storage also allows for routine maintenance while maintaining needs. Design and operation considerations are needed to prevent the development of biofilm, to minimise corrosion, to aid in the integrity. These considerations may include using closed tanks with minimizes corrosion and biofilm development and aids in sanitizing thermally or chemically.

1. We have assumed that the quality of food water is free from suspended matter, color, iron and turbidity, if these are present rays cannot penetrated effectively and we suggest pretreatment and filtration before feeding to UV system.

2. All wetted part is made of Teflon and PVC, which eliminate corrosion. Teflon Tubes, which permits maximum transmission of UV rays, are used to carry the fluid through the Disinfections chamber. The Teflon tube is not sticky, unbreakable and requires no constant cleaning.

3. The outer enclosure is made of stainless steel and indication lamps are provided to know workings of lamps are provided to know the working of lamps.
4. The unit is designed for complete separation of fluid and electrical ferrule reliability and safety.
5. We can offer 'Solenoid Valve' Time Totalize, Voltmeter, Audio Alarm and spars at extra cost against specific requirement. A separate control panel will be provided with indication lamp, voltmeter, ammeter etc. Ballast, Fan and other electrical circuits are housed separately in the panel box.

Efficient transfer of product from one place to another is continuous concern of Process Engineers and Production Managers. Centrifugal pumps and positive displacement pumps, which might work well in one application, may not be the best solution for another. In response, TSA has developed and excellent line of centrifugal and positive displacement pumps to answer many diverse applications. These pumps are highly adaptable to a wide range of applications, including those requiring a heavy-duty pump. They meet the sanitary, chemical resistant, gentle product handling, and economic needs of most customers.

The G.M.P. Fabrication can be utilized to virtually eliminate dead leg in the design of point of use outlets in a typical WFI distribution loop. The process fluid flows through the valve body. As demand warrants, the valve is opened providing an uncontaminated sample untainted by bacterial growth or contaminants which may accumulate in outlet greater than 6D.

The outlet can also be utilized as steam condensate drain or as a divert port. The valve had been modified to accept a third port of the same diameter pr smaller positioned adjacent to the weir at the bottom of the valve. Typically the G.M.P. valve is oriented in the vertical position for horizontal applications, the sterile access valve is recommended. The G.M.P. configuration is available in sizes ¼", 4" (DNB-100) and can be supplied with buttweld or ferrule end connections.

Home | Products | About Us | Contact Us | Feedback