 |
| Product :- |
We offer to our clients a wide range of advanced technology based water treatment plants, instruments and pure water distribution systems that are known for delivering superior performance in water treatment and allied processes. The availability of modern production facilities and use of advanced production techniques also enables us to bring in them customized modifications that meet the exact demands of our clients. We offer : |
| Sand Filter |
|
The Multigrade Sand Filter is a depth filter that makes use of coarse and fine media mixed together in a fixed proportion. This arrangement produces a filter bed with adequate pore dimensions for retaining both large and small suspended particles.
This filter performs at a substantially higher specific flow rate than conventional filters. Specific flow rates of 15-30m/h have been successfully obtained for treating water containing 50-25ppm suspended solids respectively to produce a filtrate with less than 5ppm. |
| Features : |
• Higher specific velocity.
• Raw water can be used for backwashing the filter. |
| Advantages : |
• Higher specific flow rate than conventional downflow filters thereby saving on Space & cost.
• Very little maintenance required.
• Lower backwash water requirement.
• In most cases, raw water can be used for backwash. |
| Applications : |
• The Multigrade sand filters filter is an ideal choice for all applications where a conventional sand filter is used.
• It is extensively used in sidestream filtration of cooling water & in potable water treatment.
• It is ideal for filtration of clarified water.
• In addition it finds application in sea water filtration & in filtration of chemical solutions.
• For these types of filtrations rubber lined or epoxy painted filters can be offered. |
| Specifications : |
• One vertical cylindrical Mild steel/FRP pressure vessels with dished ends. Mild Steel pressure vessel are painted internally with anticorrosive bitumastic paint and externally with a protective coat of red oxide primer.
• One set of internal water distribution & collection system.
• One initial charge of filter sand & underbed material
• One set of frontal pipework & valves.
• Two pressure gauges to monitor head loss across the filter.
• One orifice board(optional) for indicating wash water flow to be fitted in drain sump. Maximum / minimum operating pressure will be 3.5kg/cm2g & 2.0 kg/cm2g respectively.
• Multigrade sand filters are available from 600 to 3000mn diameters. |
|
| Carbon Filter |
Our range of NG series of manual activated carbon filters are manufacture using granular activated carbon as media, making them ideally suited for dechlorination of water with free chlorine content & for the effective removal of organic matter. We use superior grade of fibre reinforced plastic (FRP) and allied materials that helps in making our products more durable. |
|
| Features : |
• Light weight equipment.
• Easy to install - does not require concrete foundation.
The NG series of activated carbon filters are aesthetic, light weight and easy to install. |
| Advantages : |
• Light weight equipment, which is easy to install.
• Do not require concrete foundations.
• Single lever operated multi-port valve makes it more user friendly and easy to operate.
• Plastic pressure vessel and piping do not require maintenance & are corrosion resistant. |
| Specifications |
• FRP pressure vessel, fitted with plastic internal fittings.
• Set of plastic frontal piping, linking multi-port valve/plastic ball valves to FRP vessel.
• Complete charge of suitable filter media with supporting under bed media.
• One pressure vessel. |
| Applications : |
• For dechlorination of water for industrial/drinking water applications.
• Removal of organic matter from water.
• Filters are available in MS,MSRL,FRP,operating in Manual/Auto mode. |
|
| Softener |
|
The Industrial Softeners is a manually operated ion exchange unit designed specially for industrial use. It is simple to operate, inexpensive to maintain and is widely used in the industry.
The softener comprises Steel /FRP pressure vessels containing a bed of cation exchange resin, a regenerating system and control valves.
A strongly acidic cation exchange resin in sodium form is used to exchange sodium ions for the hardness –forming calcium and magnesium ions, and thus produce soft water .
At the end of each service cycle, the ion exchange resin is regenerated with sodium chloride solution, after which the units is ready for the next service cycle.
For larger plants, a brine measuring tank is provided, and a separate salt saturator, preferably in concrete, is recommended for bulk storage of salt and preparation of brine.
Standard equipments is available to soften water,upto a maximum flow rate of 275m3/h. |
| Features : |
• The series of softners are attractive, compact, easy to operate & maintain, & use international quality materials of construction, introduced for the first time in India.
• Softners are available in MS,MSRL,FRP,operating in Manual/Auto mode. |
| Advantages : |
• Easy to install and operate.
• Produces clear ,soft and non – scale forming water.
• Low operating costs.
• Incorporates high-capacity polystyrene bead type cation exchange resin which is remarkably stable and has a long life. |
| Applications : |
• Boiler feed.
• Textile processing.
• Beverage production.
• Cooling water make-up.
• Hospitals, hotels, laundries & air-conditioning plants. |
| Specifications : |
• One Mild Steel/FRP pressure vessels provided with an inlet distribution, an outlet collecting system and a brine distributor. Mild Steel vessels is painted externally with a protective coat of red oxide and internally with anti-corrosive bituminous paint
• One set of control valves, with all piping to inlet and outlet terminals.
• One combined salt tank/brine measuring tank, provided with brine suction piping with adjustable indicating clamps, hydraulic ejector and control valves.
• One orifice board for indicating wash and rinse flow rates(to be fitted in the drains sump.)
• One charge of softener cat ion exchange resin with supporting under bed.
• One hardness test kit for testing the softened water. |
| Optional : |
| One set of fittings for concrete salt saturator, wherever applicable, to be constructed by the clients. |
|
| RO Plant |
|
Scarcity of good quality water has increased our dependence on ground water sources. This brackish or saline water is unfit for drinking or for industrial use unless properly treated. Reverse osmosis, a membrane desalination process increasingly used worldwide, purifies brackish water for drinking and industrials purposes.
Reverse osmosis membrane technology produces water with very low dissolved solids and which is also free from particulate, colloidal and organics matter. |
| Features : |
• Compact unit with robust mild steel powder coated frame .
• Efficiently removes up to 95% of total dissolved solids (TDS) or salinity, producing water which is clear & pleasant to taste.
• Range of models with capacities from 30 L/h up to 1000 L/h.
• Built in safety features to protect high pressure pump & membranes.
• Capable of handling waters with TDS levels between 1500 to 2500 ppm depending on the model.
• Fully assembled and tested before dispatch.
• On-line device to monitor treated water quality. |
| Advantages : |
• The most economical &efficient method of dissolved solids removal.
• Easy to startup and uses very little space on solids in feed water.
• Can handle fluctuations of total dissolved solids removal.
• Easy availability of spares and service.
• Short delivery periods. |
| Applications : |
• Hygienic drinking water hotels ,restaurants, hospitals and residences.
• Mineral water plants.
• High purity water for hospital for use in dialysis units.
• As a retrofit to demineralisations plants in industries to reduce regeneration chemicals. |
| Specifications : |
• Cartridge pre-filter for FRP pressure vessels.
• Spiral wound membrane elements of polyamide type.
• Multistage pump made of 316 stainless steel.
• TEFC pump motor.
• 36 stainless steel high pressure piping.
• Low feed pressure switch for pump protection.
• Motor starter with disconnect switch.
• Motor contractor with thermal overload protection.
• Sample valves for feed, product and concentrate.
• Concentrate check valve.
• Product check valve.
• Automatic feed shut-off valve.
• Cleaning connections.
• Full control panel instrumentation.
• Pump discharge pressure indicator.
• Feed and concentrate flow meters. • Conductivity meter.
• Power on light.
• Fault alarm.
• Post shutdown system flush. |
|
|
|
 |
